Electric Type Carton Box Die Cutting Machine With Chain Feeding Type

Machine composition and machine performance characteristics

1 : the computer phase meter controls each printing unit and die cutting phase adjustment, and the operation is convenient and reliable.
2 : all transmission rollers are high-quality steel, hard chrome-plated, and the surface is ground.
3 : the main transmission gear adopts helical gear transmission, the material is 45 # high quality steel and nodular cast iron, carburizing and quenching the teeth are processed by shaving, the hardness is 50-55 °, the strength is high, and the wear resistance is stable.
4 : each unit of the whole machine is electrically separated, pneumatically locked, pneumatically locked, continuous during walking
bell warnings to ensure operator safety.
5 : the gear is connected to each transmission shaft with a keyless connection, so that the shaft and the gear are seamlessly connected to ensure the accuracy of color registration.
6 : the equipment is equipped with emergency stop switches before and after.

The Main Technical Parameters

Die-cutting department

1 . operating function

1 ) the template roller and the Uli rubber roller are automatically disengaged by the cylinder eccentric device without die cutting.Reduce the no-load load of the machine, and at the same time extend the life of the urethane and die.
2 ) planetary gear structure, same as the printing department.
3 ) die-cut phase is controlled by LCD screen and electric digital 360 ° adjustment (can be adjusted during running and stopping).
4 ) the machine is equipped with a urethane glue correction device, which can be used after correcting the rubber roller repeatedly.

2 . knife die roller (lower roller)

1 ) knife die roller outer diameter ф360mm (not including die)
2 ) cast steel material, the surface is finely ground and hard chrome plated.
3 ) balance correction to increase running stability.
4 ) the distance between the screw holes of the knife mold fixing screw is 100 mm in the axial direction and 18 in the radial direction.