BS－T Duplex Bridge

Technical Parameter

* Working width:1600mm

* Max speed:120m/min

* Dimension:33200mm×3930mm×4300mm

* Guiding paper roller: Upper, front ￠135mm Upper, behind ￠135mm

* Slow transmitting paper roller: active roller￠135mm passive roller￠135mm

tension roller￠85mm hang roller￠100mm

absorption transmitting paper roller:￠100mm

* Electricity: 380V 50 Hz Total Power: 18.2kw

Characteristic

* Exactly transmitting single facer corrugated cardboard to strain-tighten set or wind absorption set through transmitting belt, for next process use.

* Adopting wind absorption strain-tighten set, 4 KW high-voltage centrifugal fan vacuum adsorption strain set, electro motion correct deflection, to make sure cardboard stick tightly and level off.

* Electric control install two groups of operation plate, upper and lower bridge can be adjusted arbitrarily.

* On paper-receiving unit, adopt independent conversion driver, transmit the single corrugated cardboard across the bridge and keep enough cardboard quantity on bridge to meet the changing production speed, pre-heated by multi pre-heater, and stick through gluing machine and double facer.

* Equipped upward paper carrier, and two groups of transmitting belt conveyors, the transmitting speed is slowly, so as to form wave-like stacking, and to store corrugated cardboard.

Raw materials and purchased parts:

*Channel steel of main bridge:# 20 steel Origin: An Steel

*Paper-receiving unit transmitting belt: Nylon industry belt.

* Paper storage unit transmitting belt: Parallel transmitting belt

* Guiding paper engine( conversion control): 4.0 kw 2set continuous work Origin Wuxi

*Absorption tension engine: 4.0 kw 2set continuous work Origin Wuxi

*Paper width adjustment engine: 0.55 kw 4 sets short time work Origin: Hengshui

* Bearings: Wa, Ha, Luo bearing with seat :Jinrun, Zhejiang

* Electric appliances: Chinti Zhejiang