【NC-150N NC Cutting Machine】

Technical specification:

1. Work width: 1800mm

2. Max machine speed: 150m/min

3. Cutting length: 500mm-9999mm

4. Cardboard: original paper: ＜360g/ liner paper＜200g/

thickness3－14mm moisture content ＜10％

min. width warping1000mm ＜30mm

5.Comparative moisture:20％～90％ *Temperature required:5～50℃

6.Working pressure:0.6~0.9 Mpa

7.Cutting cardboard blade shaft diameter:upper￠ 188 mm low￠ 188 mm

8.Guiding cardboard shaft diameter:

front upper ￠165mm(sun wheel) front lower￠135mm

Back upper ￠165mm(sun wheel) back lower ￠135mm

9. Electricity :voltage 380V frequency 50Hz current 80A

10. Total power:26.08kw

11. Whole machine dimension:3200×1600×1500mm

Structure characteristic:

1. Special structure design, high tensile strength wall plate and seat, there are watching window on wall plate two sides, convenient and easy to maintain.

2. Transmitting system adopts oil pump auto-cycling lubricating, make sure transmitting precision.

3.Adopting high precision, high rigidity whetted gears, bearing high running and durable, make sure blade-edge joggle exactly, cardboard is level off and clean

4. high precision shaft, blade carrier design, cutting stably when machine high speed running

5. Special changing blade structure, quickly and easily changing blade

6. The system is made according to C.E. standard, and has been strictly tested by industry computer. The quality, life, and stability can be guaranteed.

7. Special electricity structure design, more saving electricity, can avoid the problems of not stable electricity.

8. Adopts special power bring and storage type design, save electric and could overcome electric voltage not steady environment.

9. System has self test function, can prevent machine loss because of abnormal usage and false operation

10. Computer automatically adjusts cutting speed according to cardboard specifications and production speed, automatically follow cardboard running speed, assure in –phase.

11. Computer reserves 999 groups of order, and auto-complete based on the program and preferential condition, the screen display various production message.

12.Cutting length: 500~9999mm,cutting precision :±1mm.

13.Rotary blade is made in Tainwan

14.Shaft bearings are from NSK, Japan, suitable for machine high speed running, durable.

Main bought-in parts, raw materials and origin:

Wall plates two sides and seat: HT250 casting Origin: Hebei, China

Upper lower shaft: 45# steel

Balde:W18crv5Co5(high speed tool steel)

Gear: 40Cr whetted, quenched and tempered

Main drive engine(a.c. servo)power: 22kw 1set Origin: China

Transmitting cardboard engine power:3.7kw 1set Origin: Hengshui

Oil pump engine power: 0.19kw 2set Origin: Zhejiang

Computer control system, Computer system made in Taiwan.

Bearing: (main)NSK Japan (common) Wa, Ha, Luo

(bearing with seat) Jinrun,Zhejiang

Electric appliances: Chint, China

Pneumatic parts: Airtac Taiwan, Tianyuan Shandong