【SS -200N Computerized Slitter Scorer (0 press line )】
Product Introduction
The mechanical speed: 200m/min, Effective width 1800mm
You can store 999 groups of orders, not stop automatically change or manual change.
The change quickly, for a single time 3-8 seconds, two machine and can realize deceleration immediately for a single.
The automatic tracking production line speed, and ensure synchronization, with production management systemattachment, strong compatibility.
By the programmable controller of high quality and high performance of computer and slave computer control system.
The three line type: convex to concave (three lines), convex to concave (five lines), convex to level, three wire type electric conversion. The depth of the pressure line wheel can be automatically controlled by the computer.
The thin tungsten steel alloy blade, blade sharp, life of more than 8 million meters.
The knife is controlled by computer automatic sharpening or manual sharpening, edge trimming knife, improve production efficiency.
Adopts imported synchronous drive device, precision, long service life, low noise operation.
The main parts of the bearing, other Harbin Bearing
The appliance for Schneider
The MITSUBISHI inverter
The linear guide of Taiwan
Technical Parameter:
Model | 1800 |
Max slitting width (mm) | 1800mm |
Min slitting width (mm) | 140 |
Min scoring width (mm) | 0(130) |
Scoring height (mm) | 0-10 |
Blade (mm) | φ260×158×1.3 |
Blade & Scoring Composed Type | 5blade 8 line |
Power (KW) | 24 |
Machine dimension (mm) | 3900X2100X2340 |