Double Pieces Twin-Box Folder Gluer machine

Machine overview:
Semi-automatic corrugated box gluing machine is the most advanced equipment to fill the domestic manufacturers of corrugated box labor costs rising trend, the equipment has high efficiency, flexible operation, low maintenance costs, production efficiency and the traditional manual increase more than ten times. The advantages of this device is automatic feeding, dispensing, bonding. To meet the variety, mass production requirements, to adapt to food, cotton and other product packaging needs, is the ideal carton equipment, corrugated box industry, is the essential equipment for this scope.
Features:
This series of products made of mechanical plate, all using a large processing center to complete a processing to ensure the accuracy of the various stations to ensure that the equipment is more stable operation.
1.Feeding section: friction feeder, equipped with two separate motor independent drive, side panel width can be fine-tuned, with 3 adjustable Feeding knife and 3 small Feeding knife, there are 8 rubber tape which contains 4 suction belt, two separate control, retractable rear support can be used for longer box type, to ensure smooth paper delivery fast.
2.Glue part: to match the glue itself, the use of three groups of plastic system to ensure that the finished product qualified rate of 100%, double-slot flow of plastic road, to ensure the loss of glue invalid, improve costs, easy to disassemble, easy to clean.
3.Conveying part: Using of whole process close to the synchronization technology to ensure that the paper in the fast transport process does not run away.
4.Paper part: the use of photoelectric automatic sensor system, high sensitivity, to ensure that the machine speed block.
5.Pressed part: the use of three groups of cylinders and photoelectric automatic sensor system to ensure consistency and smooth.
6.Operating system: the human touch screen for the operation center and PLC connection will be warning, detection of fault, abnormal conditions and operating speed and other information displayed on the screen, at a glance, and can detect maintenance, work records, online real-time view of timely processing, truly reflect the efficiency.
7.Electrical system: the use of well-known brands at home and abroad, in accordance with the European CE standard design, careful manufacturing, to ensure that the whole stable, high efficiency, low failure.
8.Transport system: After worker folding the boards, put it on the transport belt.
The pressing bed will press the product so that the glue will be sticked well.

Feeder Unit

1 Inlet edge vacuum suction system, air draft assists smooth feeding, accurate and reliable

2 High-grade electromagnetic clutch and brake system adopt to make feeding unit solely controlled, easy to operate and reliable

3 Scorer wheel is adjustable for paperboard of 2-8mm thickness

4 Inverter adjusts the feeding speed which range is 1-120m/min

5 Front baffle and feeding belt are adjustable transversely

Folder and Gluer Unit

1 Main motor drives inverter for speed adjustment, lowest noise, flexible for controlling and stable

2 High wear-resistant belts adopted for feeding, automatic folding

3 Stainless steel gluing wheels, glue distributing evenly, saving and long-term service life

4 Rectification device and second-creasing device adopted in the feeding sector

Interface control system

1.Using intelligent touch screen system and electrical components makes more humanize, safe and reliable.
2.PLC programming controller and touch screen digital control, easy operate , non-stop data input, automatic counting.

Intermediate conveying system

1.Adopt full screw structure easy to operate.
2.Imported high-friction belt to conveyor cardboard.

Technological parameter

Video Link: https://www.youtube.com/watch?v=GxW49QY27To