Automatic Computer Control Paper Sheet Cutter Machine

Technical parameter

I. Technical parameters

1) maximum paper roll diameter 1500mm

2) maximum paper width 1420mm

3) design speed 300m/min

4) working speed 200-300mm/min (depending on paper conditions).

5) cut value range 50-550g/

6) cutting length range 450-2000mm

7) the paper collection height is 1500mm

8) crosscutting accuracy + 0.3mm

9) square degree + 0.5mm

Description of equipment configuration

1. Stent system

1) double arm shaft less hydraulic support (two rolls of paper) 1 sets.

2) paper rolling rail cars. 2sets

3) balance adjustmentshaft 1 sets.

4) automatic tension control system 1 sets.

5) pneumatic multi-point brake 4 sets.

6) conical chuck 4 sets

2.correction system (customer selection)

1)automatic correction device (Taiwan gold medal) 1set (2level)

3. Feed system

1) reversedevice. 1 sets

2) press set 1 sets.

4. Paper cutting system

1) drum type cutting device (containing tungsten steel cross cutting knife) 1 sets.

2) paper feeding devices. 1 sets

5. Paper delivery system

1) quick delivery devices. 1 sets

2) overlapping feeding devices. 1sets

6. Stacking system

1) automatic counting marker device 1 sets.

2) automatic flush device 1 sets.

3) stack height automatic control device (automatic / manual) 1 sets

7. Walkways. 1sets

Electrical appliances:

1) Kobe servo system inGermany. 1sets

2) Shanghai Futian motor. 1 set s

3) Taiwan delta inverter (7.5kW, 11kw) each 1 set.

4) Taiwan Yonghong PLC controller 1sets

5) Futian main frequency conversion motor (11kw) 1 sets

6) conveying motor (1.1KW) 1sets

7) the paper motor (0.75KW) 1sets

8) lifting motor (2.2kW) 1sets

The main automation control functions of the equipment.

1) automatic tension control system

2) automatic diagonal adjustment system

3) automatic counting function

4) automatic marking

5) automatic preset stop function

6) overload alarm function of motor

Equipment operation requirements

1) total power: about 22.5kW

2) power supply: 380V, 50-60HZ, three-phase four wire.

3) gas supply: hydraulic oil, air compressor 0.6, /min, 380V (buyer's own)

Presentation:

1) random standard tools. 1 sets

Appendix: accessories brandlist

Video Link: http://www.corrugatedcardboardmakingmachine.comhttps://www.youtube.com/watch?v=W24ng4w0lbo&list=PLth2qFzjpXAWEC_9emwxv9DQ21eJWB_yW