※ ZJZ Automatic glue station system

※ structural feature:

★ The system does not use the system stabilizer paste, paste and liquid infiltration and paste liquid stable, long-term storage is not hierarchical.

★ The whole system was controlled by setting the program, and the control system software is the company's own design and development according to the actual needs of each carton factory, stable and reliable.

★ All material is added through the program settings, complete PLC control, measurement precision.

★ The system is equipped with temperature sensors and temperature display and control temperature glue to ensure that the starch molecules are more soluble in water, while avoiding the quality of the glue and have a greater impact by ambient temperature changes.

★ The device has an automatic wash tank program, after each delivery finished glue, self-cleaning tank.

★ Each point with plastic tank level sensor to monitor the implementation level, low level PLC automatically selected, depending on the recipe paste glue points.

★ Shearing, mixing time is set by the program controlled by the PLC.

★ After the caustic soda into caustic soda, stored in a tank in lye; lye tank level transit level controlled by the PLC, when it reaches the lower limit set by the lye tank pump automatic replenishment.

★ When the starch material level down to the tank level sensor, the system automatically alarm and vibration add materials to add material.

★ Sent glue by pneumatic diaphragm to glue storage tank automatically, controlled by the PLC control.

※ technical parameters:

1, steam pressure 8-10kgf/m2.

2, Water pressure 5-6kgf/m2.

3, Compressed air pressure 4-7 kgf/m2.

4, The maximum consumption of compressed air 105m3/h.

5, Total power 32KW.

6, Viscosity Changes within ± 2s.

7, Pasting temperature Changes within ± 1 ℃.

8, Glue time 30min above.

9, The maximum amount of each glue 1650 kg, the minimum amount of glue 750kg