high speed flute laminating machine for 1-12mm corrugated paper
Main Characteristics
- Adopting back pusher , back positioning feeding , equipped with spring side lay and bottom suction system , to make our machine suitable for all kinds of paper , and keep the good characteristics of easy operation and convenient maintain .
- The glue roller adopts high design , match with anilox to glue distributing , the uniformity of coating was improved greatly, increasing the intensity of draping , reduce the cost of customer production .
- The steel roller through the balanced treatment and test , match the tight assembling to make higher stability . And adopting the timing belt and tooth type belt driving , make the machine running with higher precision and lower noise.
- Adopting the liquid control system , automatic gluing , and the glue can be cycle used , avoid glue waste and labor strength .
- Self-developed high-strength feeder with high configuration electric system make the machine running stable and lower failure rate, the electric parts adopt international wide available brand or well-known Chinese brand.
- This machine bottom paper is suitable for A, B , C, D, E, F flute . It can do 3 layer, 5 layer board to sheet laminating or thick board to board laminating . The surface paper need 200-600 GSM . With top paper advance and alignment function .
Technological Parameter
Model | HL-1300A-IV |
Max Laminating Size ( W×L ) | 1300mm*1100mm |
Min Laminating Size ( W×L ) | 350mm*350mm |
Economical Speed | 6000 sheets/h |
Laminating Precision | ≦+/- 1.5mm |
Total Power | 12 kw |
Machine Length | 12.5m |
Machine Weight | 6.8 tons |
