Corrugated Packing Carton Automatic Feeding Water Ink Printer Slotter Die Cutter Machine

1 The whole machine details features and instruduction

The machine main printing department

1, printing roller and embossing roller adopt high quality, thick-walled seamless steel pipe, surface grinding, hard chromium plating.
2, anilox roll the dalian tengda Φ 175 mm high quality steel 200 mesh / 220 mesh, can be more than 45 line flexible printed version.
Spent 3 rubber roller adopts jizhou chunfeng Φ 175 mm high quality resistant, oil resistant, acid and alkali resistant rubber, to design the high grinding, the effect is good.
4, of the printing system, in version is easy to operate, and is equipped with foot switch, convenient to hang version 5, print roller pressure adjustment and high-speed printing machine driving cross slider no clearance adjustment for high precision fine-tuning, can make the printing pressure to reach the best state.
6, 360 ° electric phase, the digital display control device by computer CPU, according to the error of input data directly, automatic adjustment phase, printing power phase adjusting mechanism adopts planetary gear mechanism work, did not stop the condition, any adjustment can be 360 °, the axial adjustment for manual, the adjustable distance 30 mm, machine regulated or stop operating.
7, diaphragm pump automatically to the ink system, pneumatic lift version, gas into the ink, and is equipped with automatic distributing system, effectively avoid intermittent, the machine stops ink dries, the adverse factors affecting the printing effect, back to refill tube using 1.2 inch PVC pipe, tube wall is smooth, prevent sticking ink ink, can put more ink ink barrels back, in a timely manner to avoid ink leakage phenomenon.
8, pneumatic brake brake mechanism, when the machine separation limit the machine regulated, keep the gear fixed position.

Printing roller

(1) for phi, diameter 408.6 mm (including version of outer diameter to 410 mm).

• , steel pipe surface grinding, hard chromium plating.
  (3), do the balance calibration, smooth operation.
  (4), ratchet fixed volume edition axis.
  (5), the full version version of the groove, suitable for 10 mm * 3 mm version of the article.
  (6), loading and unloading in print, pedal switch electric control and reversing.
  2, printing roller

(1), the outer diameter of 156 mm.

(2), steel pipe surface grinding, hard chromium plating.
(3), do the balance calibration, smooth operation.
(4), the printing press dial manually adjust the roll gap, adjusting range 0-12 mm.
3, to send a piece of paper, under the roller (1), the roller: outer diameter for 86 mm thick wall steel pipe, with the three paper ring.
(2), under the roller: outer diameter for 156 mm thick wall steel pipe, surface grinding, hard chromium plating.
(3), paper roll gap dial manual adjustment, adjustment range 0-12 mm.

2 Machine main details parameter

3 Machine main picture show

If you are interested in these specifications machines , please timely contact with me !!!