1000W Portable Ups Power Supply 5Kva Ups System for Medical Office
1000W Portable Electrical UPS System/Uninterrupted Power Supply Inverter UPS
Product information
Exclusive Feature |
1. Pure sine wave output.
2. Wide AC voltage input range, AVR output.
3. Adopt traditional EI transformer , stable performance.
4. LCD/LED&LCD real-time display, concise and straightforward.
5. Working modes: AC first or battery first optional, intelligent charging.
6. Built-in MPPT or PWM charge controller optional.
7. RS232 communication port optional.
| Product Details |
| Technical parameter |
Specification | ||
Model NB | 10212/24 | |
Rated Power | 1000W | |
Peak Power(20ms) | 3000W | |
Start Motor | 1HP | |
Battery Voltage | 12/24VDC | |
Size(L*W*Hmm) | 410*143*210 | |
Packing Size(L*W*Hmm) | 460*200*270 | |
N.W.(kg) | 13 | |
G.W.(kg)(Carton Packing) | 14 | |
Installation Method | Tower | |
Parameter | ||
Input | DC Input Voltage Range | 10.5-15VDC(Single battery voltage) |
AC Input Voltage Range | 73VAC~138VAC / 145VAC~275VAC | |
AC Input Frequency Range | 45Hz~64Hz | |
Max AC charging current | 6A~15A (Depending on the model) | |
AC charging voltage | LEAD battery:Charge Voltage :14V; Float Voltage:13.8V(Single battery voltage) | |
AC charging method | Three-stage (constant current, constant voltage, floating charge) | |
Output | Efficiency(Battery Mode) | ≥85% |
Output Voltage(Battery Mode) | 110VAC±2% / 220VAC±2%(Battery Mode) | |
Output Frequency(Battery Mode) | 50Hz±0.5 or 60Hz±0.5 | |
Output Wave(Battery Mode) | Pure Sine Wave | |
Efficiency(AC Mode) | >99% | |
Output Voltage(AC Mode) | 110VAC±10% / 220VAC±10% | |
Output Frequency(AC Mode) | Tracking Automatically | |
Output waveform distortion(Battery Mode) | ≤3%(Linear load) | |
No load loss(Battery Mode) | ≤2.5% rated power | |
No load loss(AC Mode) | ≤2% rated power( charger does not work in AC mode) | |
No load loss(Energy saving Mode) | ≤10W | |
Battery Type | Customize battery | Charge and discharge parameters of different types of batteries (such as lithium batteries, etc.) |
Protection | Battery undervoltage alarm | 11V(Single battery voltage) |
Battery undervoltage protection | 10.5V(Single battery voltage) | |
Battery overvoltage alarm | 15V(Single battery voltage) | |
Battery overvoltage protection | 17V(Single battery voltage) | |
Battery overvoltage recovery voltage | 14.5V(Single battery voltage) | |
Overload power protection | Automatic protection (battery mode), circuit breaker or insurance (AC mode) | |
Output short circuit protection | Automatic protection (battery mode), circuit breaker or insurance (AC mode) | |
Temperature protection | >90°C(Shut down output) | |
Alarm | A | Normal working condition, buzzer has no alarm sound |
B | Buzzer sounds 4 times per second when battery failure, voltage abnormality, overload protection when | |
C | When the machine is turned on for the first time, the buzzer will prompt 5 when the machine is normal inside | |
Inside Solar controller | Charging Mode | PWM or MPPT |
Charging current | 10A/20A/30A/40A/50A/60A | |
PV Input Voltage Range | PWM: 15V-44V(12V system); 30V-44V(24V system) / MPPT: 15V-120V(12V system); 30V-120V(24V system) | |
Max PV Input Voltage(At 25℃) | PWM: 50V(12V/24V system) / MPPT: 150V(12V/24V system) | |
PV Array Maximum Power | 12V system: 140W/280W/420W/560W/700W/840W; 24V system: 280W/560W/840W/1120W/1400W/1680W | |
Standby loss | ≤3W | |
Maximum conversion efficiency | >95% | |
Working Mode | Battery First/AC First/Saving Energy Mode | |
Transfer Time | ≤4ms | |
Display | LCD | |
Thermal method | Cooling fan in intelligent control | |
Communication | RS232(Optional) | |
Environment | Operating temperature | -10℃~40℃ |
Storage temperature | -15℃~60℃ | |
Noise | ≤55dB | |
Elevation | 2000m(More than derating) | |
Humidity | 0%~95% ,No condensation | |
Warranty | 1 year | |
Note: All specifications are subject to change without prior notice |
COMPANY INFORMATION:
FAQ
Q1: Are you a factory or trading company?
A: We are a professional battery manufacturer with our factory and brand. We provide all kinds of OEM/ODM services for clients, which can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2.Can I have a sample order?
A: Yes, we welcome sample orders to test and check quality.
Q3: Where can I get the price?
A: We will offer you the best quotation in 12 hours after we get the product specifications such as voltage capacity application etc.
Q4. What are your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q5. How about your delivery time?
A: Generally, it will take 20-30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q6. Do you test all your goods before delivery?
A: Yes, We have a professional QC team to make sure that the product is in good condition before sending out the goods.
Q7: How do you make our business a long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.