Details | Technical data |
Principle of measurements | Electrochemical fuel cell Sensor, alcohol-specific |
MeasurementRange(BrAC) | 0-400mg/100ml |
Resolution | 0.0001 |
Accuracy: | Less than 5% |
Calibration | Every 6 months |
Testing Mode | Active & Passive Mode |
Temperature range-operation | -5℃~ 50℃ |
Temperature range-storage | -30℃~ 70℃ |
Blowing Time | <3 seconds (breath flow:≥20L/min) |
Warm-up Time | <20 Sec, 6 seconds after switching on |
Recovery Time | <100mSec(typical), 5 seconds to 5 minutes, depends on Ethanol Vapor Concentration |
Analysis Time | <10 seconds |
Optimum Storage Conditions | Temperature 25℃±5, Humidity: <80%RH,Pressure: 86kPa~106kPa, No vapor or electromagnetic disturbances in the environment are influencing the normal working conditions of the device. |
Display TFT LCD | 2.4 inch 320*240 dot matrix touch screen |
Memory Capacity | Stores 10,000 values with information |
Communication Method for Printer | Bluetooth |
Printer | External connected Bluetooth Dot Matrix Printer |
Dimensions (L*W*T) | Approx. 140mm*60mm*24.5mm |
Number of measurements per Battery Pack | More than 500 times (under ambient conditions) |
Fuel Cell Life | > 3 years (Depends on uses) |
Batteryof Analyser | 1200mAH, 7.4VDC Li-ion Battery Type |
Batteryof Printer | 1500mAH, 7.4VDC Li-ion Battery Type |
Weight | Approx. 180g |