Radio Remote Controls have become a key element within a modern working context where safety,
productivity, freedom of movement has a continuously increasing importance. Industrial radio controllers
are consequently for time saving and risk reduction working instruments.Thanks to the radio controller, the
operator stands in the place with the best visibility and lowest operationrisk. The wireless technology allows
controlling the machine in full autonomy without requiring other operators to support the job with indications.


EXCLUSIVE CONTROL
You will be certain that no other radio device will take over the control of your application thanks to an
exclusive communication channel protected by a unique ID code that IMET assigns to each radio remote
control.


CONTINUOUS AND SAFE TRANSMISSION
This device operates in continuous transmission between the transmitting and receiving units. The radio
link is made of digital communication frames that are monitored by algorithms at the reception. This
guarantee an absolute correspondence between the commands sent by the operator and the received
commands. When the radio link is too disturbed or interrupted the receiver unit will autonomously turn into
Stop mode bringing the machine to a safe status.


INTRINSIC SELF CONTROL
Our Radio controllers are based on designing and manufacturing concepts aiming to guarantee safety
and reliability. For example, the CPU features dual microprocessors in cross checking, STOP circuit is
made of monitored double safety relays, STOP relay is available for the reduction of motion command
failure risk, error and failure test are performed at each transmitter and receiver powering.

The ranges of applications of our industrial radio remote control system

1. overhead bridge cranes,

2. gantry crane

3. beam launcher

4. monorail hoists,

5. motorized jib cranes o

6. Other pieces of industrial equipment.

Design features