XGC 300t Crawler Crane Technical Specifications

Crawler crane models:XGC 300t
Max rated lifting capacity: 300t
Maximum lifting moment: 1865t.m

Safety measures

A variety of mechanical, electronic and hydraulic safety and alarm devices are widely used to ensure the safe use of the machine. Safety devices include torque limiter, slewing lock, boom anti-tilt, lifting height limiter, boom angle limiter, level gauge, slewing warning and hydraulic system overflow valve, balance valve, hydraulic lock, etc.

Mode switching

You can switch between installation mode and working mode. In installation mode, the overwinding prevention device, boom limiter, torque limiter, etc. are not functional, which is convenient for crane installation.

In working mode, all safety devices are functional.

Emergency Stop

With emergency stop function, all actions can be stopped quickly in an emergency.

Anti-misoperation function

The handle has an anti-misoperation function. A safety protection switch is set on the front side of the handle. When this switch is not pressed, all action signals are shielded and the handle does not work to prevent misoperation.

Anti-overwinding function

The overwinding device is set at the boom head to prevent the wire rope from overwinding. When the hoist reaches a certain height, the overwinding indicator light on the display will light up and the hoisting action will stop automatically.

Anti-over-releasing function

The lifting mechanism is equipped with a three-turn protector to prevent the drum from over-releasing when releasing the rope. When there are only three turns of the hoisting wire rope left, the over-releasing indicator light on the display will light up and the lowering action will stop automatically.

Pawl lock function

It is equipped with a ratchet locking device to lock the luffing winch to ensure that the boom is safely parked when not in operation.

Slewing lock function

It is equipped with a slewing locking device, which is used for parking and storing the crane when it stops, and for locking the upper vehicle's slewing.

Anti-tilting function

The main boom and jib bracket are equipped with an anti-tilt device to prevent the boom and jib bracket from tilting backward.

Lifting boom angle limit function

When the main boom reaches the specified angle, the lifting is stopped and is controlled by the torque limiter and the travel switch. When the elevation angle of the main boom is less than the specified angle, the falling is stopped and is controlled by the torque limiter and an audible alarm is issued.

Hook anti-drop function

All hooks are equipped with anti-drop plates to prevent the slings hanging on the hook heads from falling off.