CA-3116D Original 100W Mono Audio Amplifier Board TPA3116D2 Receivers & Amplifiers
Products Description
- lt is manufactured according to European standards, with superior flame retardantperformance, safety and environmental protection. The selection of large terminals isnot only the consideration of power, but also the pursuit of quality.
- Pulse strength, high reliability and good self-healing
- When the current passing through the inductance coil increases, the self induced electromotive force generated by the inductance coil is opposite to the current direction to prevent the increase of current, After inductance filtering, the pulsation of load current and voltage decreases. When the current passing through the inductancecoil decreases, the self induced electromotive force is the same as the current direction to prevent the decrease of current and release the stored energy at the same time, To compensate for the decrease of current. The waveform becomes smooth.
- Features: large capacitance. The chip capacitor and the base plate are soldered.There are no solder joints on the back of the circuit board, so there is no possibility of short circuit, Chip capacitors are higher than plug-in capacitors in terms of selected components and production process cost.
- The heat emitted by the chip passes through staggered channels from the centerfor convective heat dissipation, which has higher heat dissipation efficiency.
Products Parameters
Product name | CA-3116D amplifier board |
Input voltage | DC 12-24V |
Input current | above 3A |
AMP power | Mono 100W |
Chip model | TPA3116D2 |
Output impedance | 2-8Ω |
Input impendance | 10KΩ |
SNR | 100dB |
Product size | 79.9*54.2(mm) |
Product net weight | 52.9g |
