Bronze Brass Flange Split Bushing Customized Oiling Lubricant Split Bushing

Product description

There are two types of copper bearing: integral type and split type. The integral bearing is usually called bushing. Whether there is oil groove or not for integral bearing bush.

Mechanical copper tile is a kind of mechanical accessory needed by many equipment, so how should we do it for its normal maintenance?

1. the copper tile should be stored in a relatively dry place. Pay attention to the humidity control of the storage place. Try not to let it contact with dust and oily substances, which will directly cause the corrosion of the copper tile.

2. For the transportation of copper tiles, when they are stored and transported in our warehouse, or when they are transported remotely, we should first remove the stains on the surface of copper tiles, which will produce a lot of stains during the processing. When carrying, it is necessary to pay attention not to contact with hands directly. Hands are prone to perspiration, which will directly cause corrosion and discoloration of copper tiles.

3. For the cleaning of copper tiles, in some dust-free workshops, it is necessary to completely clean them when loading the equipment. We can choose to use distilled water and neutral soap as the cleaning method. Do not use some chemicals for cleaning. If possible, you can find a professional to clean it.

4. In the use of mechanical equipment, we should pay attention to the change of copper tile. Once there is copper disease certificate, we should maintain or replace it in time to protect the safety of equipment.

Casting method:

Problems to be noticed in the processing of copper bearing bush:

1: During casting, each process must be carefully handled. For example, the core must be placed in the right position when the box is closed, so as to avoid that the products cast cannot be processed according to the size due to this reason.

2: Before processing, first clean the casting, then get on the car, first calibrate, then get off the car when processing to the semi-finished product, and cool it, because copper has shrinkage, in order to process accurately, get on the car again when the workpiece is placed at room temperature for processing.

3: After the finished product, especially the straight sleeve cannot be placed horizontally, it shall be placed vertically to prevent deformation.

4: The packaging shall be reserved to avoid deformation due to accidental collision during transportation

More details