Provides High Customized And Precise Thrust Plate For Spring Crusher

Product description
Round plate) is a very important part of copper accessories in cone crusher. Its functions are as follows:

A. reduce the slidingfriction of equipment in operation, reduce power loss;

B. greatly increase the service life of wear-resistant parts of cone crusher, reduce maintenance and repair costs, and strive for higher equipment utilization;

C. effectively protect the steel parts in contact with it from wear when copper It is easy to replace the worn parts.

Maintenance method

1. The storage of copper crafts must be dry and free from dust and air pollution, and the relative humidity should be below 50%.

2. All contaminated dirt must be removed before storage, and chemical protection is preferred. It is not allowed to use thick grease, the oil applied on the handicraft, and cotton gloves must be used for the contact of the handicraft. It is absolutely not allowed to sweat with hands, oil paper or packing box.

3. Remove the dust on the copper crafts, use soft cloth, soft brush, soft cloth, etc.

4. If it is necessary to wash water with water, distilled water can also be heated, and neutral soap can be used. Do not use ammonium hydroxide, acid and white powder, gauze, etc. If professional cleaning requires a lot of cleaning.

5. Cleaning copper castings can be coated with a layer of chemical protective agent or paraffin after heating in the original method, or can be sealed with a layer of silica gel in a modern way to prevent harmful gases and moisture.

6. To prevent mechanical damage to objects, do not overlap them. It's better to put each handicraft in a box. Frequently observe the change of copper process. Once the symptom of copper disease occurs, it should be treated in time. The method can be used to wash with bicarbonate (5% sodium carbonate + sodium bicarbonate) until there is no chloride ion.

Instructions for inquiry:

1. Drawing: you need to provide the copper sleeve drawing, drawing number, sketch or sample, any one can. (these are the premise of our service to you, and also the important standard to facilitate your acceptance of workpieces after we do them well, so please be sure to provide them.)

2. Quantity: you need to customize the quantity of copper castings. (the more quantity, the more favorable price! )

3. Material: material requirements of copper bushing. (national standard or enterprise standard or American Standard for export, please indicate. These will affect the price to a great extent

4. Duration: This is also an important information. If you need it urgently, it will increase the manufacturing cost. Generally, the manufacturing cycle of castings is 8 days.

RFQ