Manufacturer's direct sales high quality brass copper bushings

Product description

Copper bushing is a part of mechanical equipment. It is mainly used in belt slinger, and it is also widely used. Copper bushing is an indispensable part in the application of mechanical equipment.The main materials used for copper bushing are centrifugal casting and die casting. Most of its exterior colors are cyan and yellow. Like other mechanical equipment, copper bushing has its own characteristics.

1. Wear resistance

The wear resistance of copper bushing is better, different materials have different characteristics. The internal structure of the copper bushing parts is still relatively close, and it will not be too loose. It has no pores and sand holes, so it looks bright from the appearance, and its color is relatively special. And most importantly, its hardness is relatively high.

2. corrosiveness

Another characteristic of copper bushing is corrosion resistance, and the corrosion performance is relatively good. It is mainly used in the atmosphere and fresh water, because the environment is relatively good. In the process of using the copper bushing, it is not easy to be killed.

3. Compressive capacity

Copper bushing's compressive capacity is also relatively good, its surface pressure is very large, it can bear the side pressure of the bearing well, and it can also operate under the condition of high load pressure.

This is the main characteristics of copper bushing, and its casting performance and cutting performance are also relatively good. So copper bushing is a good part.

Advantage:

① There is almost no metal consumption in the gating system and riser system, so the production rate is improved;

② The hollow casting can be produced without core, so the ability of metal filling can be greatly improved, the ratio of casting wall thickness to

length or diameter can be reduced, and the production process of sleeve and tube castings can be simplified;

③ The casting has high density, few defects

④ It is convenient to manufacture cylinder and sleeve composite metal castings, such as steel back copper sleeve, bimetal roll, etc.; during

casting forming, centrifugal movement can be used to improve metal filling capacity, so thin-walled castings can be produced

Product Specification;