Epoxy Or 3lpe 2lpe Anti Corrosion Steel Pipe Fittings Anti Corrosion Steel Pipe
Brief Introduction
This standard specifies requirements for factory-applied three-layer extruded polyethylene-based coatings,and one- or multi-layered sintered polyethylene-based coatings for the corrosion protection of steel pipes and fittings.
This standard sets minimum requirements for shop‑ and field‑applied, liquid‑epoxy interior linings and exterior coatings used in the water‑supply industry for steel water pipelines installed underground or underwater, under normal construction conditions. a single coat of a two‑part, chemically cured epoxy coating.
Maximum temperature. AWWA steel pipe coating standards ar1.1.2.1 e based on the maximum service temperature of water. The purchaser shall consult the coating manufacturer for conditions and limitations.
Specification
Standard: | Din30670 |
Length: | 6-15 Meter |
Wt: | 2mm-25mm |
Application: | Corrosion Protection Of Steel Pipes And Fittings |
Material: | Gr.b St37 Ss400 St52 Gr.50 X42 X52 |
OD: | 33-3000mm |
Coating Thickness: | 2.0mm-5.0mm |
Packing: | Standard Export Packing |