Automatic CTCP/UV CTP plate making machine
Technical specification
Model	9900B
No. of Lasers	96
Throughput (1130x800mm) (plates/hour)	35PPH
Max./Min. Format	Max.: 1160mmx940mm Min.: 350mmx400mm
Laser Source	405 nm
Resolution	2400 dpi (Resolution can be customized, up to 8000dpi maximum)
Loading System	Automatic, Semi-Auto ( Auto-loader available)
Plates Requirement	0.15-0.4mm UV plates, no brand requirement
CTP Interface	1-bit Tiff interface and direct workflow driver, support CIP3/CIP4
Power	AC220V,50-60Hz 8KW
Environment	Temperature: 20-25ºC Humidity: 40%-80%
Size & Weight	Size: 2200mmx1350mmx1350mm Weight: 1500kg
Workflow software	RIP Harlequin &Workflow Prinergy

Our advantages

Yintech ctp machine 10 advantages why choose us? products structure design advantages, 7x24 hours service advantages, warranty time=5 years

1.Autofocus system

The same as Kodak, we adopted real-time auto-focus technology. Auto-focus brings not only more flexible on plates’ options, but also more saturated dot, if the drum happens to deform or plates not flat, , auto-focus system can make up these flaws.

2.Maglev track technology

We adopted maglev track (magnetic levitation) to replace traditional lead screw. traditionally, manufacturers use lead screw to drive the lens, the interval between lead screw and nut will increase after used, as a result, it will decrease the accuracy of plates making.

Moreover, lead screw need to be lubricated frequently to keep it smooth.

3.Non-linear Calibration system

Nonlinear graphical calibration system can perfectly reproduce rectangle, eliminating dimensional deviation caused by different plate thickness.

4.Use high power laser diodes

High-power diodes. Unlike most manufacturers use 1w diodes for CTP machines and 70mj (200mW) diodes for CTCP machines, we use 2W diodes for CTP machines and 120mj (300mW) for CTCP machines. Based on usual use, higher power diodes can expect a longer life and not so easy to get aged.

5.Built-in bearing in the drum

We used built-in bearing to support our drum, which brings higher stability and more accuracy when the drum rotates in a high speed, without a big deviation.

6.Top-class components and parts

We use top-class accessories in all our equipment, which brings our products more stable performance and longer life. -Fuji motor from Japan; -Lasermech thermal diodes from USA; -Nichia UV diodes from Japan; -Maglev system and bearings from Germany; -Sensors from Spain.

7.workflow and RIP software

we install the most popular ctp work flow &RIP software for our clients, Prinergy & Harlequin.

8.Remote diagnosis system.

( Remote diagnosis) Through “ Teamviewer”, our technicians can share data with customers‘ computer in real-time, thus to diagnose their CTP equipment.