52kw 65kVA Yto Lr4b3z-D Super Silent Industrial Backup Generator
1. Powered by heavy duty industrial diesel engines
2. Radiator 40 or 50 degree max, fans are driven by belt, with safety guard.
3. 12/24DC start motor and storage battery.
4. Brushless, self-excited, IP22/23, insulation H alternator.
5. Absorber to reduce vibration.
6. Dry type air filter, fuel filter, oil filter.
7. Main line circuit breaker.
YTO Engine :
YTO (Jiangyan) Power Machinery Co., Ltd. is a subsidiary of China Yituo Group Co., Ltd., which is based on
Yangdong Co., Ltd. and has become the multi-cylinder small diesel production base with the largest variety,
the most complete specifications and the largest scale in China. One has the ability to produce 300,000
multi-cylinder diesel engines per year. There are 18 basic multi-cylinder diesel engines with cylinder bores
from 80-102mm, displacements from 1.3-3.9L, and power coverage of 10-105kW. With its powerful power,
reliable performance, economical and durable, low vibration and low noise, the diesel engine has become
the first choice for many customers .
PRODUCT DESCRIPTION |
Genset Model | BS-YT100 | |
Rated Output (KW/KVA) | 80KW/100KVA | |
Max Output (KW/KVA) | 88KW/110KVA | |
Phase | 3 | |
Power Factor (cos Ø) | 0.8 | |
Frequency | 50HZ/1500RPM | |
Rated Voltage (V) | 400V | |
Rated Current (A) | 144A | |
Silent Genset Dimensions (MM)--N.W(KGS) | 2300*1050*1200--1100KGS | |
Engine | Model | LR4N5LP-D |
Type | 4-cycle, compression ignition, Water cooling | |
Cylinder Numbers | 4-cylinder in line | |
Standby Power (KW) | 105KW | |
Air intake type | Turbocharged with Aftercooler | |
Displacement(L) | 5.32 | |
Compression Ratio | 17:1 | |
Firing order | 1-3-4-2 | |
Starting Type | Electric starting | |
Bore×Stroke (MM×MM) | 112x135 | |
Engine Sound level | ≤ 113 dBA | |
Test Conditions | Air temperature | 25 °C |
Barometric pressure | 100kPa | |
Relative humidity | 30% | |
Air inlet Restriction at maximum power (nominal) | ≤ 5kPa | |
Exhaust back pressure (nominal) | ≤ 6 kPa | |
Cooling system | Total coolant capacity: (engine only) | 6litres |
Maximum top tank temperature | 99 °C | |
Thermostat operating range | 76~95 °C | |
Lubrication system | Lubricating oil type | L-ECD 15W/40 |
Lubricating oil capacity | 14 litres | |
Lubricating oil temperature maximum to bearings | 115°C | |
Oil Pressure @ Idle Speed @ Governed Speed | ≥98kPa 294~490kPa | |
Maximum engine operating angles Front up,front down/right side or left side | 20°/15° | |
Fuel system | Fuel oil type | 0# or 10# |
Type of injection system | Direct injection | |
Fuel injection pump | PM pump | |
Governor type | Electronic | |
Electrical system | Alternator | 24volts with integral regulato |
Starter motor | 24volts | |
Alternator | Type | Copy Stamford-BS274C |
Rated Output (KW/KVA) | 80KW/100KVA | |
Max Output (KW/KVA) | 88KW/110KVA | |
Power Factor (cos Ø) | 0.8 | |
Excitation Mode | single-bearing with SAE , Brushless synchronous , Three harmonic exciting | |
AVR Model | SX460 | |
Insulation Class | H CLASS | |
IP Level (PROTECTION) | IP23 |
FAQ |
Q: Do you offer OEM service?
A: Yes
Q : What is the difference between Prime power and Standby power ?
A : Prime power is 12hours continous power , one hour 10% over load in every 12 running hours is allowed .
Standby power is the limit value of maximum output for emergency use . Overloading is prohibited
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.But if your order with some special design,
then the delivery time is longer.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP
for Nigeria,CIQ for Egypt, SASO for Saudi Arabia, etc
Q:What is your MOQ?
A: Above 1pc