Fire Damper Frame Production Line

TDF Fire Damper Roll Forming production Line Brief Introduction

The Fire Damper Frame produced by the Roll Forming Line is the TDF flange style Damper. Our automatic Fire VCD damper production line is high efficiency machine, it is developed based on fully absorbing abroad competitors' advanced experience, it applied new crafts, new techniques and solved effectively many problems brought plate without any damages. the fire damper produced by it doesn't need weld and rust prevention treatment, and guarantees the zinc coating of zinc with any damages, which conforms to the national environmental protection requirements, its full line achieved standardized, intelligent and high efficiency production, reduced product period greatly, saving time and labor, and reduced the scrap rate of product, which is the idea equipment for batch production of fire VCD damper.

The whole solution for HVAC fire VCD damper production are including outer damper frame roll forming machine, positive pressure air supply outlet production line, blade roll forming machine, support roll forming machine, stainless steel spring profile roll forming machine, riveting platform, copper sheathing, square shaft making machine, etc.

Technology specification of TDF Damper frame roll forming machine

The normal VCD frame profiles production Line is designed according to 1.5mm thickness GI Steel. The VCD damper frame profile production line is consisted of uncoiler (manual), leveler and hydraulic press, hydraulic cutter, strip feeding table, roll form machine, hydraulic bender, hydraulic system, electrical control system, etc.

Basic components

- UNCOILER 1set

- Leveler, holes punching, notching, cutter 1set

- Strip Feeding platform 1set

- Main Roll forming machine + bending device 1set

- Hydraulic bender 1set

- CNC control system 1set

- Hydraulic system 1 sets

Function Description

- Double servo driving, full automation operation

- Damper frame width: 200-320mm; adjustable

- Flange type: 34 common plate/ 30 angel steel / 40 angle steel

- Damper Frame type: L Type; hollow square; single chip

- Efficiency: 350pcs / 8 hours

- Continuous production order model process

- Accordance with 3C certification specification

Main Parameters of TDF Damper Frame Production Line

- Raw material: GI steel

- Thickness: 1.2-1.5mm

-. Coil weight: ≤3000kg

- Line speed: 1-15m/min (adjustable)

- Length tolerance: ±0.3mm/1000mm

- Punching hole distance tolerance: ±0.3mm/1000mm

- VCD Frame bending tolerance: ± 0.08mm / 1000mm

- Profile Flange: Fixed width 200 mm (VCD Flange 35mm) (According to customer requirement)

- Processing method: cut To length / single straight piece / 口 type / L type

- Control mode: PLC control

- Equipment dimensions: 15000 × 1000 × 1200mm

- Total power: about 24KW

Fire VCD Damper frame Brief introduction

The fire damper actions details are as following, when the temperature of the flue gas reaches 280 °C, the person has basically evacuated, the smoke exhaust has no practical significance, and the flue gas has been fired at this time, the valve will be closed automatically, to avoid the spread of fire. The exhaust fumes of the system can be used to eliminate the smoke exhaust fire damper on the branch pipe by closed fire exhaust vent. In case of fire, the air outlet is opened or manually opened by the control center through 24V DC. When the smoke temperature reaches 280 °C, it is automatically turned off, and the reset must also be manual. Smoke exhaust fire dampers should also be installed at the entrance of the exhaust fan room to spread the fire to the floor of the fan room.

The profile drawing is for type of TDF flange style damper. Custom style decorative sheet profiles are welcome!

Customized damper can be designed according to client drawing or sample.