1.Sample plan
Sampling plan according to GB/T2828.1-2003/ISO 2859-1:1999 and ANSI/ASQC Z1.4-1993,normal
level 2and based on:
Major defect: AQL 0.65
Minor defect: AQL 1.5
2. Inspection condition
Viewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environmentof
20~40W light intensity, all directions for inspecting the sample should be within 45°against perpendicular
line.
Other product:
OLED | ||||||
No | Model | Size | Resolution | Color | Outline Dimension | Interface |
1 | OKP6448-01 | 0.66 inch | 64x48 | white | 18.46x18.1x1.25 (mm) | 4-wire SPI, I2C |
2 | OKP12832-02 | 0.91 inch | 128x32 | white | 25.9 (W)x10 (H) | I2C |
3 | OKP12864-03 | 0.96 inch | 128x64 | white | 26.70x19.26x1.4 (mm) | 4-wire SPI, I2C |
4 | OKP9696-01 | 1.12 inch | 96x96 | full color | 25.8 (W)x30.1 (H) | 4-wire SPI, I2C |
5 | OKP12864-05 | 1.30 inch | 128x64 | white | 34.5x23.0x1.4 (mm) | 4-wire SPI, I2C |
6 | OKP128128-01A2 | 1.50 inch | 128x128 | white | 32.8x30.8(mm) | SPI |
7 | OKP12864-11 | 1.54 inch | 128x64 | white | 42.04x27.22x1.4 (mm) | 4-wire SPI, I2C |
8 | OKP160128-01 | 1.77 inch | 160x128 | full color | 42.7x 33.4(mm) | 4-wire SPI, I2C |
9 | OKP25632-01 | 1.80 inch | 256x32 | white | 52.0x34.7(mm) | 4-wire SPI, I2C |
10 | OKP12864-09 | 2.40 inch | 128x64 | yellow | 60.5x32.3(mm) | 4-wire SPI, I2C |
11 | OKP25664-01 | 3.20 inch | 256x64 | white | 87.4x28.5(mm) | 4-wire SPI, I2C |
12 | OKA0139-01 | 1.39 inch | 400x400 | full color | 38.6x40.0(mm) | MIPI,SPI |
13 | OKA0141-01 | 1.41 inch | 320x360 | full color | 26.04x30.18 (mm) | MIPI |
14 | OKA0500-08 | 5.00 inch | 720x1280 | full color | 64.12x116.7(mm) | MIPI 4 lines |
15 | OKA0550-06 | 5.50 inch | 1080x1920 | full color | 70.66x128.36x0.82(mm) | MIPI 4 lines |
The specification
FAQ
Q:What should I do if a part I receive is damaged?
It is extremely rare to receive a damaged part because we quality test all of our parts before shipping them out.
However if you believe a part you ordered was damaged before you tried to install it,
keep it in its’ original box and wrapping and contact us so that we may assist you.
Q:Are you manufactory or trade company?
We are the ODM and OEM manufactory specialized in FSTN, STN and TFT more than 10 years in Shenzhen! Our factory have passed IS09001:2000,SGS Factory Audit and ISO14001:2004. Our advanced full set equipments make sure good quality and competitive price!
Q:Can you design the lcd in acccordance with our demand?
Sure.We will give you the best tooling charge.