120926 Silver Electrode,Powermax1250 Consumables, PMX1250/1650/RT600

We can offer you all plasma consumables for , Kjellberg, Esab, Koike, Komatsu, Thermadyne, such as: electrode, nozzle, shield, swirl ring, inner cap, retaining cap, water tube, torch body and so on.
We are specialized in the production of plasma cutting machine torch consumables manufacturer, we are engaged in the industry for ten years.
Our products are processed using CNC machines, we have fifteen sets of high-precision testing equipment and Eighty experienced skilled workers

.





Technical Support:
plasma cutting arc fault analysis

4. input AC voltage is too low

Plasma cutting machine using the site has a large power use facilities, cutting machine internal main circuit components, etc., will make the input AC voltage is too low. The solution is to check whether there is enough capacity of the power supply line to meet the requirements of the power line of the power supply line in the plasma cutting machine. Plasma cutting machine installation location, should be far away from large electrical equipment and often have electrical interference place. In the use of the process, to regularly clean up the dust and dirt on the components in the cutting machine, check whether the wire aging phenomenon, etc..

5. earth wire and workpiece contact

Grounding is an essential preparation before cutting. Without special grounding tool, the workpiece surface with insulation and long-term use of aging serious ground wire, etc., will make the earth and the workpiece contact. Solution: use a special grounding tool, and check whether the insulation effects of the ground and the workpiece surface contact, avoid the use of aging grounding wire.