3 port C+L Band Polarization Insensitive Optical Circulator
GEZHI’s polarization insensitive optical circulator utilizes proprietary designs and metal bonding micro optics packaging. It provides low insertion loss, broad band high isolation, low PDL, excellent temperature stability and optical path epoxy free. It can be used for wavelength add/drop, dispersion compensation and EDFA application.
Feature
♦ Low Insertion Loss
♦ Wide Band High Isolation
♦ Low PDL
♦ Compact In-Line Package
♦ High Stability and Reliability
♦ Epoxy-free on Optical Path
Application
♦ Optical Amplifier
♦ Metro Area Network
♦ Wavelength Add/Drop
♦ Dispersion Compensation
♦ Bi-Direcation Communication


Technical Paremeter
Parameter | P Grade |
Configuration | Port 1 to Port 2 to Port 3 |
Operation Wavelength (nm) | 1525 to 1610 |
Isolation (dB) | Typical | 0.8 |
Maximum | 1.0 |
Typical Isolation (dB) | 50 |
Minimum Isolation (dB) | 35 |
Cross Talk (dB) | ≥50 |
Polarization Dependent Loss (dB) | <0.2 |
Polarization Mode Dispersion | <0.1 |
Return Loss(dB) | ≥50 |
Power Handling (mW) | 500 |
Opterating Temperature (℃) | -5~+75 |
Storage Temperature (℃) | -40~+85 |
Package dimension (mm) | Φ5.5xL50 orΦ5.5xL63 |
Ordering Information
IC | X | XX | X | X | X | XX |
| Port | Wavlength | Grade | Fiber Type | Fiber Length | In/Out Connector |
3=3 Port | CL=C+L Band 1525~1610nm | P=P Grade | 1=Bare fiber 2=900um loose tube | 1=1m 2=2m | 0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC S=Specify |
Application Diagram
As the picture shows: The input DWDM channels are coupled into Port 1 of the device with a FBG device connected to Port 2. The single wavelength reflected from the FBG then reenters the Circulator in Port 2 and is routed accordingly to Port 3. The remaining signals pass through the FBG and exit on the top fiber.
Circulator used to drop an optical channel from a DWDM system using a Fiber Bragg Grating.

As the picture shows: A Circulator is located at both ends of the fiber. Each Circulator functions to add a signal in one direction while removing the signal in the other. See the example to the left.
Circulator can be used to send optical signals through a single fiber in two directions.

Dimension

Q1:Can I have a sample order? What is your MOQ? A1:Sample order is welcome to test and check quality. We don't MOQ, 1pcs sample is available. Also Mixed samples are acceptable.
Q2: What's the Lead time?
A2: The normal lead time is about 1week, For big quantity and special products. Please check lead time with our sales representative. But we keep stock for some products, could ship 1-3 days after receiving payment.
Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,cash payment, ALI etc.
Q4: What is your warranty time?
A4: 3 years' warranty.
Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.