Single Row Taper Roller Bearing NSK HR32244J Bearing is one kind of tapered roller bearing design . Its dimension is 220×400×114mm , weight is 60kg , the material are adopt high quality chrome steel , this design are separable. the bearing ring with the rollers and cage assembly can be separated from the other ring, so this kind of bearing are the same with single row cylindrical roller bearings.

Tapered Roller Bearing NSK HR32244J Bearing have tapered inner and outer ring raceways and tapered rollers , they are designed to accommodate combined loads , simultaneously acting radial and axial loads . The geometry and surface finish of the roller ends and the area on the flange that makes contact with the roller ends have been optimized to promote and maintain the formation of a lubricant film .

NSK HR32244J Bearing , It’s rather amazing how simple the basic design really is. NSK tapered roller bearings minimize friction because of the interrelationship of the bearing’s four basic parts:

•The inner ring, or cone, is mounted onto the shaft.

•The outer ring, or cup, sits in the housing (hub) .

•The tapered rollers, or rolling elements, allow relative motion between the cone and cup thus minimizing friction between the two.

•The cage, or separator, spaces and holds the rolling elements in the proper position.

•The races are the surfaces on the cup and cone where the rolling elements make contact.

The tapered roller bearing’s most important dimensions are:

•The outside diameter of the outer ring, or cup, is known as the O.D. (D). The other basic dimension of this part is the cup width (C). Both are important for fitting the bearing onto the housing.

•The inside diameter of the inner ring, or cone is called the bore (d). This diameter must be correct in order to fit the bearing onto the shaft. The other basic dimension of this part is the cone width (B).

•When cup and cone are mated (including rollers and cage), the overall dimension is called the overall bearing width (T). Bearing components or assemblies must be in alignment.

NSK HR32244J bearing is Tapered roller bearing and commonly type and widely used in many application like the spindle of machine , it contains inner ring , outer ring , and steel cage,tapered roller bearing can carry radial and axial loads in both directions , NSK Taper roller bearing are particularly versatile and are simple in design , separable , NSK HR32244J bearing are suitable for high and middle high capacity , but low cost maintenance . as one of the biggest top quality bearing brand , Quality can be approved by the market .

Application Of Single Row Taper Roller Bearing NSK HR32244J Bearing

XRB is the China bearing manufacturer,exporter , supplier , it can supply NSK HR32244J bearing , Our large quantity Single Row Tapered Roller Bearings Stock can meet your need with good quality and fast delivery , Also you can find FAG 32244X Bearing , the other type and brand tapered roller bearing . just like NACHI , NTN , NKE , ZWZ , TIMKEN . We accepted DHL , FEDEX , TNT express for small order and samples order , also the transportation By AIR or By Sea , by Train are all avaiable . we asure we can ship high quality NSK HR32244J bearing to your office at the first time .