Secondhand Wheel Loaders CAT 966G USED 966 wheel loader
CAT 966G wheel loader for sale,
Japan loader,lower working hours,new model,new bucket,clean cabin,moving speed,hydraulic strong,ready to work.
Net Power | 253 hp | 188.7 kw |
Gross Power | 235 hp | 175.2 kw |
Power Measured @ | 2200 rpm | |
Displacement | 640.7 cu in | 10.5 L |
Number of Cylinders | 6 | |
Operational | ||
Operating Weight | 50155.2 lb | 22750 kg |
Fuel Capacity | 108.3 gal | 410 L |
Hydrauilc System Fluid Capacity | 54.7 gal | 207 L |
Static Tipping Weight | 34731.6 lb | 15754 kg |
Transmission | ||
Number of Forward Gears | 4 | |
Number of Reverse Gears | 4 | |
Max Speed - Forward | 23.2 mph | 37.3 km/h |
Max Speed - Reverse | 26.3 mph | 42.3 km/h |
Hydraulic System | ||
Raise Time | 6.6 sec | |
Dump Time | 1.3 sec | |
Lower Time | 1.8 sec | |
Bucket | ||
Breakout Force | 44120 lb | kN |
Dump Clearance at Max Raise | 10.2 ft in | 3100 mm |
Bucket Width | 10 ft in | 3060 mm |
Bucket Capacity - heaped | 4.3 yd3 | 3.3 m3 |
Dimensions | ||
Length with Bucket on Ground | 29 ft in | 8825 mm |
Width Over Tires | 9.7 ft in | 2960 mm |
Height to Top of Cab | 11.8 ft in | 3590 mm |
Ground Clearance | 1.4 ft in | 430 mm |
Reach at Max Lift and Dump | 4.3 ft in | 1305 mm |
OUR MACHINERY:
We also have the following used machines for sale, please check the details below for your reference.
category | brand | model |
Used excavator | hitachi | EX60,EX100,EX120,EX200.ZX200,EX300,EX400, ZX330,ZX450,ZX470 |
Cat | 320b,320c,320d,330B,330c,330d,336,345 | |
kobelco | Sk200 | |
komatsu | Pc55/60/200/220/300/400 | |
Daewoo/hyundai | Dh220,solex220 | |
Used wheel loader | cat | 950,966f,962G,966G |
komatsu | Wa320,350,360,380,420,470 | |
Tcm/Kawasaki/furukawa | 75B,850/870,KLD70/85Z,FL230/330 | |
Used bulldozer | cat | D3/4/5/6/7/8/9 |
komatsu | D85/D155 | |
Used compactor | DYNAPAC | Ca25,ca251,ca30,ca301,ca51,ca602 |
Ingersoll-rand | Sd100,sd150,sd175 | |
cat | Cs531 | |
Used motor grader | cat | 12g/h/120g/h/140g/h/140k |
komatsu | GD505,405,GD605,GD511 | |
Mitsubishi | MG400,MG550 | |
Chaimpion/Dresser | 740,850,870 | |
Used crane | Mobile crane kato/tadano | 20----300ton |
Crawler crane,kobelco/sumitomo/hitachi | 30----300ton | |
Rough terrain crane,kato/tadano/Grove | 25---50ton | |
Used forklift | TCM/TOYOTA/KOMATSU/Fantuzzi reach stacker | 2---50ton |
Used mixer,tractor,pump truck | ISUZU,FUSO,Mitsubishi,HINO,VOLVO | CX35,FH12.FM9.FM12… |
category | brand | model |
Used excavator | hitachi | EX60,EX100,EX120,EX200.ZX200,EX300,EX400, ZX330,ZX450,ZX470 |
Cat | 320b,320c,320d,330B,330c,330d,336,345 | |
kobelco | Sk200 | |
komatsu | Pc55/60/200/220/300/400 | |
Daewoo/hyundai | Dh220,solex220 | |
Used wheel loader | cat | 950,966f,962G,966G |
komatsu | Wa320,350,360,380,420,470 | |
Tcm/Kawasaki/furukawa | 75B,850/870,KLD70/85Z,FL230/330 | |
Used bulldozer | cat | D3/4/5/6/7/8/9 |
komatsu | D85/D155 | |
Used compactor | DYNAPAC | Ca25,ca251,ca30,ca301,ca51,ca602 |
Ingersoll-rand | Sd100,sd150,sd175 | |
cat | Cs531 | |
Used motor grader | cat | 12g/h/120g/h/140g/h/140k |
komatsu | GD505,405,GD605,GD511 | |
Mitsubishi | MG400,MG550 | |
Chaimpion/Dresser | 740,850,870 | |
Used crane | Mobile crane kato/tadano | 20----300ton |
Crawler crane,kobelco/sumitomo/hitachi | 30----300ton | |
Rough terrain crane,kato/tadano/Grove | 25---50ton | |
Used forklift | TCM/TOYOTA/KOMATSU/Fantuzzi reach stacker | 2---50ton |
Used mixer,tractor,pump truck | ISUZU,FUSO,Mitsubishi,HINO,VOLVO | CX35,FH12.FM9.FM12… |
Product Advantages:
1. Reasonable Structure Layout; Simple Maintenance,high efficient Chaochai/ISUZU/Mitsubishi engine
2. Streamlined Design, fluency, harmony and elegance in shape
3. The short turning radius and Load Sensing Hydraulic Power Steering System
4. The design with the man-machine engineering principle reduces operator fatigue and stress
5. No harmful gas released and is nice for the environment protection and energy saving
6. Scientific ergonomic designs ensure the comfort of driving,advanced technique with good after-sale service
PACKING & SHIPPING:
1.Container: The cheapest and fast one ;put the machine into container need disassemble .
2.Flat rack: Often used to ship two wheel loader,max load-bearing is 35tons.
3.Bulk cargo ship: which is better for bigger construction equipment,no need disassemble.
4.RO RO ship: The machine is driven directly into the ship and does not need to be disassembled.
OUR SERVICES:
Pre-Sales Service
We trust that customer satisfaction is the only benchmark to inspect our works.
1.Airport picking
2.Hotel booking
3.Translating and guiding during your visit in Shanghai
After-Sales Service:
1. Training how to instal the machine, training how to use the machine.
2. Engineers available to service machinery overseas.
Our customers
We have customers from both domestic market and oversea market. Our main sales market:
Asia: Malaysia, Vietnam,Maynmar,Pakistan,Philippines, Bangladesh
Middle East: Saudi Arabia,Iran,Kuwait,Syria,Jordan
Africa: Cameroon ,Egypt, Nigeria,Ghana, Kenya,Tanzania,Guinea
South Ameriaca: Bolivia,Chile,Ecuador,Guyana,Suriname
Our company maintains 500 sets of machine stock for customers to purchase all the year round. Our professional technical team will inspect every machine in detail, and ensure that the machine runs well before shipment. At the same time to provide customers with thoughtful after-sales technical advice and accessories Services.