Used Construction Machinery wheel loader CAT 966G Payloader used loader
Net Power | 220 hp | 164.1 kw |
Gross Power | ||
Power Measured @ | 2200 rpm | |
Displacement | 640.7 cu in | 10.5 L |
Number of Cylinders | 6 | |
Aspiration | Turbocharged | |
Operational | ||
Operating Weight | 45161.7 lb | 20485 kg |
Fuel Capacity | 80.3 gal | 304 L |
Hydrauilc System Fluid Capacity | 54.2 gal | 205 L |
Engine Oil Fluid Capacity | 7.4 gal | 28 L |
Cooling System Fluid Capacity | 10.8 gal | 41 L |
Transmission Fluid Capacity | 15.6 gal | 59 L |
Front Axle/Diff Fluid Capacity | 12.4 gal | 47 L |
Rear Axle/Diff Fluid Capacity | 12.4 gal | 47 L |
Static Tipping Weight | 30825 lb | 13982 kg |
Turning Radius | 22.2 ft in | 6779 mm |
Operating Voltage | 24 V | |
Alternator Supplied Amperage | 50 amps | |
Rear Axle Oscillation | 26 degrees | |
Tire Size | 26.5-25 14PR | |
Transmission | ||
Type | Planetary powershift | |
Number of Forward Gears | 4 | |
Number of Reverse Gears | 4 | |
Max Speed - Forward | 23.4 mph | 37.6 km/h |
Max Speed - Reverse | 26.5 mph | 42.6 km/h |
Hydraulic System | ||
Relief Valve Pressure | 3000 psi | 20684.3 kPa |
Pump Flow Capacity | 79.8 gal/min | 302 L/min |
Raise Time | 7.1 sec | |
Dump Time | 2 sec | |
Lower Time | 2.4 sec | |
Bucket | ||
Breakout Force | 48446 lb | 215.5 kN |
Dump Clearance at Max Raise | 9.3 ft in | 2845 mm |
Bucket Width | 10.2 ft in | 3107 mm |
Bucket Capacity - heaped | 4.7 yd3 | 3.6 m3 |
Bucket Capacity - struck | 4 yd3 | 3.1 m3 |
Dimensions | ||
Length with Bucket on Ground | 27.4 ft in | 8366 mm |
Width Over Tires | 9.6 ft in | 2935 mm |
Height to Top of Cab | 11.8 ft in | 3585 mm |
Ground Clearance | 1.6 ft in | 476 mm |
Wheelbase | 11 ft in | 3350 mm |
Hinge Pin - Max Height | 13.5 ft in | 4118 mm |
Reach at Max Lift and Dump | 4.6 ft in | 1398 mm |
Available from stock:
We also have the following used machines for sale, please check the details below for your reference.
Used Excavator | 1. HITACHI EX100WD, EX120, EX200-1, EX200-2, EX200-3, EX200-5, EX350, ZAXIS200, ZAXIS230 2. KOMATSU PC60, PC120, PC130-7, PC200, PC210, PC220 3. CAT CAT312B, CAT320B, CAT320C, CAT325B, CAT330B, CAT 330C 4. HYUNDAI, DAEWOO, KEBOLCO, SIMITOMO, etc |
Used Bulldozer | 1. D6D, D6H, D7H, D7G, D8 K, D8N, D9L 2. KOMATSU D75A-1, D85A-18, D85A-21, D155-1, D155-2, D355, D375 |
Used Road Roller | 1. DYNAPAC CA25, CA30 (weight: 8T-14T) 2. BOMAG BW213D-2, BW217D-2, BW219D-2 |
Used Wheel Loader: | 1. KOMATSU WA300, WA350, WA360, WA380, WA400, WA470 2. CAT CAT936E, CAT950B, CAT950F, CAT966D, CAT 966E, CAT966F 3. KAWASAKI KLD65Z, KLD70, KLD70B, KLD80, KLD85, KLD85Z 4. TCM TCM230, TCM870 |
Used Motor Grader | 1. CAT 12G, 120G, 14G, 140H 2. KOMATSU GD511A, GD605R, GD623A |
Used Truck Crane | 1. KATO: NK250E, NK350E, NK400E-3, NK500E, NK550E 2. TADANO: TL250E, TL300E, TG500E, TG550E, TG650E |
Used Crawler Crane | 1. HITACHI KH125 35T, KH180 50T, KH700 150T 2. KOBELCO 7045 50T, 5100 100T, 7150 150T 3. SUMITOMO LS118 50T, LS238 100T, LS248 100T |
PACKING & SHIPPING:
1. Container: The cheapest and fast one ;put the machine into container need disassemble .
2. Flat rack: Often used to ship two wheel loader,max load-bearing is 35tons.
3. Bulk cargo ship: which is better for bigger construction equipment,no need disassemble.
4. RO RO ship: The machine is driven directly into the ship and does not need to be disassembled.
Our customers
We have customers from both domestic market and oversea market. Our main sales market:
Asia: Malaysia, Vietnam,Maynmar,Pakistan,Philippines, Bangladesh
Middle East: Saudi Arabia,Iran,Kuwait,Syria,Jordan
Africa: Cameroon ,Egypt, Nigeria,Ghana, Kenya,Tanzania,Guinea
South Ameriaca: Bolivia,Chile,Ecuador,Guyana,Suriname
Our company maintains 500 sets of machine stock for customers to purchase all the year round. Our professional technical team will inspect every machine in detail, and ensure that the machine runs well before shipment. At the same time to provide customers with thoughtful after-sales technical advice and accessories Services.
FAQ:
1. How to guarantee the condition and lifetime of the machine ?
A: We choose good condtion and less hour used machines. We are available for third part certificate of all of the machines.
And they are all available for your inspection in its place.
2. How to have after sale service from us ?
A: We have old suppliers in China, used or new parts are available for us to get, with reasonable price and in short time.
3. How can customers make visit and checking in China ?
A: We arrange everything ready for your jouney in China, welcome your happy visit!~