White FFP2 Face Mask With Latex Free Elastic Strap 3 Layer For Superior Protection
- FFP2 Dust Mask with adjustable aluminum nose clip makes wearing more sealless leakage .
- With latex-free elastic strap , soft nose liner , softer and fit the face .
- Easy-breathing valve makes breathing more smooth .
- Outer layer : Protective pp spun-bonded non-woven
- Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
- Inner layer : Shaped needle punched cotton
Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish |
Filter Efficiency |
Penetration |
Resistant |
FFP1 NR |
≧80% |
< 20% |
< 21mmH2O |
FFP2 NR |
≧94% |
< 5% |
< 24mmH2O |
FFP3 NR |
≧99% |
< 1% |
< 30mmH2O |
How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
- The seal of the respirator on the face should be fit-checked before entering the workplace.
- If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.