NC feeder, aluminum profile stamping, Ruihui automatic stamping equipment

NC feeder is the most commonly used feeding machine in the market. It has the highest feeding accuracy, the most convenient operation and the most stable feeding equipment. The maximum feeding length is up to 10 meters and the feeding precision is up to ±0.02mm. It is far from unmatched by other feeder models.

1. Pneumatic NC feeder: It belongs to a general-purpose NC feeder. It adopts a feeding machine that uses a punching cam to send a relaxation signal to achieve a relaxing action through the cylinder action. Therefore, it is the most suitable range among the four NC feeders. Wide model.

It can be used with traditional punching machine, and it can be matched with precision punching machine. It can be installed on any punching machine, and can be applied to shearing machine and hydraulic press. It is almost free from the limitation of equipment installation, but the cylinder is slow to relax. Therefore, the feeding speed is generally 60-120 times/min, which is not suitable for high-speed feeding operation with short step.

2. Mechanical NC feeder: It is a simple and easy to use machine. The principle of relaxation is exactly the same as that of the roller feeder. The relaxation movement is fast and fast. It does not need to be controlled by the cam angle, and the relaxation is accurate and timely. High stability, especially suitable for high-speed feeding in short steps, of course, due to the need to install additional relaxation devices.

Therefore, the scope of application is not as wide as that of the pneumatic NC feeder, but if both can be installed, Ruihui Machinery recommends that the customer prefer the mechanical NC feeder.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi