Unlike the other models commonly used in other feeder types, the NC feeders are available in both pneumatic and mechanical versions.

The pneumatic NC feeder is a standard model because it is not limited to installation. It can be used with a variety of presses, as well as hydraulic presses, shears, and laser cutters.

However, there is a shortcoming that the relaxation action is driven by the air source to drive the cylinder, and the speed is slow, resulting in a limited overall feed speed.

The Ruihui mechanical NC feeder is optional, because its installation is limited, and it is necessary to install a loose rod device on the processing equipment, which can only be used with a punch press.

However, it has a significant advantage in that it is quick to relax, suitable for high-speed feeding in short steps, and it is extremely easy to relax and adjust when used with traditional punching machines. Therefore, it is more suitable for mechanical NC feeders for high-speed stamping occasions and traditional punching machines. .

The NC feeder is composed of two parts: the mechanical head and the electric control box. Although the mechanical control box is identical to the pneumatic NC feeder, the head part is quite different from the pneumatic NC feeder.

The mechanical NC feeder head can be divided into upper and lower parts, a servo motor is fixed on the lower left side, and a spindle is fixed on the right side of the motor. The spindle is driven by the motor through the synchronous pulley.

A lower roller (active roller) and a gear are fixed on the main shaft, and a handle is fixed on the lower right side. The left side of the handle is connected with a rotating rod, and two irregular adjusting blocks are fixed on the rotating rod.

In this way, it is necessary to adjust the distance between the lower roller (active roller) and the upper roller (passive roller) by simply rotating the handle to lift the adjustment block to the upper portion, and the irregular adjustment block is for diversifying the gear position for adjustment.

In order to facilitate the entry of the material to be processed, the front end of the lower portion is sequentially fixed with a bracket wheel and two adjusting wheels. The height of the two adjusting wheels is preferably parallel to the center of the distance between the main shaft and the counter shaft, so that the feeding is facilitated.

The upper drum (passive roller) and the gear used in conjunction with the lower drum (active roller) and the gear are fixed on the upper portion, and are fixed by the secondary shaft, and a relaxation wheel connected to the punching and relaxing rod is fixed on the upper portion;

When the mechanical NC feeder feeds, the processing material passes the lower roller and the upper roller, and the processing materials are conveyed by clamping and driving of the two rollers; when the punching slider pushes the bar to press down, the relaxation action is realized, and the precise stepping is realized. Feeding action.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi