MachineU > China Products > Machinery > Metal & Metallurgy Machinery > Metal Straightening Machinery
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
Specifications
Brand Name :
RUIHUI
Certification :
CE, ISO certification
Place of Origin :
Guangdong, China (Mainland)
MOQ :
1 Set
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :
30 Sets Per Month
Delivery Time :
30 work days
Packaging Details :
Wooden Box or Vacuum Packing
Stock Width(mm) :
70-1000
Stock Thickness(mm) :
0.6-6.0
Line Speed(m/min) :
16~24
Coil Weight(Kg) :
7000
Work Roll Number(Pcs) :
upper 6/lower 5
Main Motor(Kw) :
AC 11.0
Warranty Period :
12 Months
Max.Coil O.D.(mm) :
1400
Coil I.D.(mm) :
508
Feed Length(mm) :
~500*
Mandrel Expansion :
Hydrauilc
Reel Motor(kw) :
2.2
Operating Air(Mpa) :
0.49
Description

Press stamping and guiding device, NC feeder feeding height, automatic process

1. Determine the installation position of the NC feeder according to the feeding direction requirements.

2. Hang the punch positioning block of the NC feeder fixing plate on the workbench of the punching machine. Note that the center line of the fixing plate and the center line of the punching plate of the punching machine should be aligned.

Then tap the M14 thread on the punching table and lock the punching table with the hexagonal M14 screw fixing plate.

3. Loosen the nut with the serial number 1. Lift the NC feeder to align the fixed plate. After determining the height, the screw with the serial number 2 is screwed to the appropriate position. Finally, the hexagonal M14 screw and the M14 spring pad feeder are fixed on the punching table. Side of the plate.

4. During the installation process, if the horizontal position of the feeding height of the NC feeder is not consistent with the stamping height of the die, the NC feeder slide will have an adjustment of about 100 mm for adjustment.

At this time, the two M14 bolts on the slide plate can be loosened, and the bolts fixed on the mounting plate can be adjusted. At this time, the feeding height of the feeder can be adjusted, adjusted to a proper position, and the screws can be locked.

5. When installing the mold on the press, make sure that the side of the mold is perpendicular to the direction of the roller of the NC feeder. If there is a distance between the pallet and the lower die when punching the thin material, the guiding device must be installed.

In order not to bend the material as a principle, and the mold is fixed perpendicular to the roller, otherwise the material will be skewed, resulting in feed resistance, resulting in different lengths of the feed.

6. according to customer needs, install the electric control box and proximity switch in the appropriate part of the press, and check whether its operation is normal.

NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device

7. If there is anti-rust oil on the NC feeder, please be sure to remove it and add lubricant to the oil filling part.

8. Please refer to the electrical circuit diagram assembly for the power supply line of this unit.

9. Special attention: The NC feeder must be grounded to avoid electric shock events and circuits to prevent interference.


Specifications:

ModelMAC4-600FMAC4-800FMAC4-1000FMAC4-1300F
Stock Width(mm)70~60070~80070~100070~1300
Stock Thickness(mm)0.6~6.00.6~6.00.6~6.00.6~6.0
Max.Coil Weight(kg)50005000700010000
Max.Coil O.D.(mm)1400140014001400
Coil I.D.(mm)508508508508
Feed Length(mm)~500*~500*~500*~500*
Max.Line Speed(m/min)16~2416~2416~2416~24
Work Roll Number(piece)upper 6/lower 5upper 6/lower 5upper 6/lower 5upper 6/lower 5
Feed Roll number(set)1111
Main MotorAC7.5AC11.0AC11.0AC11.0
Mandrel ExpansionHydrauilcHydrauilcHydrauilcHydrauilc
Reel Motor(kw)2.22.23.77.5
Power(v)3 Phase 220V/380V/50HZ
Operating Air(Mpa)0.490.490.490.49


Straightening Performance:

ModelMAC4-600FMAC4-800FMAC4-1000FMAC4-1300F
Stock Thickness
(mm)		0.8~2.360080010001300
2.8933933
3.2714714714
4.0457457457457
4.5361361361361
5.0293293293293
6.0203203203203



Products:

NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device

NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device





































Product tags

radial insertion machine

,

decoiling and straightening machine

,

hotglue binding machine
Send your message to this supplier
Send Now

NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device

Ask Latest Price
Product Detail
Brand Name :
RUIHUI
Certification :
CE, ISO certification
Place of Origin :
Guangdong, China (Mainland)
MOQ :
1 Set
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :
30 Sets Per Month
Contact Supplier
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device
NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device

GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.

Active Member
8 Years
guangdong, dongguan
Since 2000
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer, Exporter, Trading Company, Seller
Main Products :
Decoiler Straightener Feeder, Coil Feeder Straightener, Decoiler And Straightener
Total Annual :
30000000-50000000
Employee Number :
200~300
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Decoiler Straightener Feeder
MachineU China Products Machinery Metal & Metallurgy Machinery Metal Straightening Machinery
Contact Supplier
Submit Requirement