Roller NC Leveller Feeder Automation Equipment Universal Wheel Stamping

The punch feeder is an automatic device that replaces the manual manual feed for the punch. In the conventional cognition, the feeder is stepped feeding for the punch inlet.

That is, pushing the feed form from left to right or from front to back, only when stamping some very thin materials, the material will be soft and have certain ductility. At this time, if the normal push feeding mode is still adopted.

In the feeding process, the material is easily bent and formed into an arch, which causes the feeding to be inaccurate, and ultimately affects the quality of the stamped product, and is highly susceptible to mold damage.

The air feeder, roller feeder and NC servo feeder commonly used in the stamping industry can be converted into reverse pull type. Of course, the installation of the pull-up type has the preconditions:

1. The tailings and finished products after thin material stamping are not broken. If it is broken, the inverted pull type punch feeder cannot be used, only by adding a guiding device between the normally installed feeder discharge port and the mold. To reduce the bending of the material.

2. For the roller feeder and the mechanical NC feeder, especially the roller feeder, it not only needs to install the loosening rod on the table on the slider of the punching machine but also needs to be powered by the output shaft.

If the punch output shaft is on the side of the feed port, it cannot be installed. At the same time, the press is fed from front to back in many occasions. The pull material needs to be moved from the back to the front. At this time, the loose rod cannot be installed, so the mechanical NC cannot be used. Feeder.

It is precisely because the roller feeder and the mechanical NC feeder are subject to installation restrictions. Therefore, most of the materials used in the drawing are the Ruihui air feeder and the pneumatic NC feeder, and the modification is also very easy.

The air feeder only needs to replace one gas exchange valve. The pneumatic NC feeder has almost no need to make any changes, but with the stamping industry, the precision and stability requirements of the stamping products are getting higher and higher.

Air feeders are far from adequate to meet the needs of customers, so pneumatic NC feeders have become the preferred retractable feed equipment for the stamping industry.

products:

specifications

FAQ:

Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.