3-in-1 feeder feeding trolley loading method: After the coil is placed, the hydraulic motor control system controls the hydraulic motor to work, and the hydraulic motor drives the driving sprocket to roll on the chain guide to promote the movement of the trolley.

After moving to the designated position, the oil control system controls the lifting cylinder to push the frame of the trolley to rise. When the frame is raised, the driving sprocket and the driven sprocket connected to the right and left arms are close to each other. The support frame rises.

When the inner ring of the coil is aligned with the tensioning device of the 3-in-1 feeder rack portion, the hydraulic motor drives the trolley frame to continue to advance the coil into the tensioning device, and the tensioning device tightens the coil. After fixing, the car reverses the action and completes the feeding.

The weight of the material carried by the MAC feeder is large (usually above 3T), so special attention should be paid to the loading and unloading. The loading trolley is one of the optional devices for customers to purchase the 3-in-1 feeder. It is set in 3-in-1. 1 The side of the feeder rack part can automatically feed the coil into the tensioning device of the rack part, and the feeding is accurate and fast.

When using the trolley device for loading and unloading the three-in-one feeder, the following instructions must be followed to avoid unnecessary dangers:

1. Please do not drop the material roll directly onto the rack and roll it into the equipment.

2. All the coil positioning and auxiliary equipment are emptied for loading and unloading, but the trolley device must be used for loading and unloading at a safe/reasonable speed.

3. When feeding and feeding, confirm that the coil is fully supported. It is worth mentioning that the coil should not be overweight.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi