Procedures to manufacture a window/door

Setp1 Choose profile system according to clients' requirements(there are many systems,we

choose profile according to the open style and thickness of the glass);

Step2 design the window/door with CAD drawings(we provide the drawings to clients for their

confirmation before production);

Step3 work out the production list and give order to the workshop;

Step4 cut profile in needed length;

Step5 drill lock hole,drinage hole.etc;

Step6 assemble the frame and sash(we use high quality aluminum corner connector to make the

frame and sash stable enough);

Step7 install the hardware(use stainless steel screw);

Step8 combine the frame and sash;

Step9 check the quality;

Step10 package(wrapping film+wood pallet);

Step11 load the windows and doors in container for shipment.

My Service

This is Martin,I have been in this field for more than 5 years.I used to work in the workshop for

almost 2 years,then I began to do the foreign trade.Now,Ican do every job of windows and

doors manufacturing and exporting.

First,we talk about the detailed requirements of the windows and doors;

Second,I design and provide CAD drawings to you for your confirmation.

Third,I work out the production list and give production order to the workshop,they begin to

manufacture,during this procedure,I stay in the workshop to control the quality.

Fourth,after production,I will arrange the shipment.

Fifth,I offer advice on the installation if necessary.

Our Advantage

1.Our factory has 10 year's manufacturing and exporting experience.

2.We are specializing in producing aluminium windows and doors,carports and sunrooms.

3.Our product quality is controlled by ISO9001:2008,and we have CE,AS2047 Certifcates.

4.We've exported our products to Australia,India,Phillippines,Mozambique,Angola,Canada,

etc,more than 22countries.

5.Any small order or trial order is accepted.

6.Good pre-sale and after-sale service.

7. 10 years quality warranty.