Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions

Specifications of Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions :

1. Material : Stainless steel 304,304L,316,306L etc.
2. Ferrules Material : Tinned-copper,Nickel-plated copper, Stainless steel etc.
3. Cable construction and Diameter : 7x7 (Dia.: 1.2 - 2.5mm), 7x19 (Dia.: 3.0 - 4.0mm)

Structure of Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions:

The stainless steel rope mesh is manufactured using a unique hand-woven interlocking technique from standard 7” x 7” and 7" x 19" ,stainless steel cable to create diamond openings from 1” through 4”.

Advantages of Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions:

• The netting is clipped to the cable,
• The mesh size and diameter can be modified
• It can be made to customer orders and statically tested – especially suitable for facades
• High strength, strong toughness, free-angles curving and fold, easy for transportation and installment.
• Anti-corrosive, resist the rust, can be repeated use.
• Resists chewing by rodents and other pests (tensile strength approximately 100-110,000 PSI)
• This product can bear the heavy snow and the gale very much.
• without toxic material, safety, environmental protection.

Recommend Specifications of Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions:

Advantage of Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions:

Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions give balustrades and railings a sense of elegance, space and style. With careful planning and design, they have the ability to totally transform the look. Their clean and simple lines create a sleek and modern aesthetic, while offering uninterrupted views. They’re contemporary, low-maintenance and surprisingly easy and fast to install.

FAQ of Stainless Steel Wire Rope Mesh for Handrail & Balustrade Solutions:

• Can you make as our required specifications?

Yes, we will manufacturer as your required specifications like mesh size, rope diameter or other special materials etc. Manufacturing always follow your instructions.

• Is there any limited to the length and width?

Firstly clear one concept when talk about the length and width. Is the rope mesh installation horizontal or vertical? See below picture. We ‘d better clear the direction before confirming the length and width. In the status of vertical (see below) ,any Width is available .Length should be limited to 20meters . We have to joint the mesh in length if exceed.

• Irregular mesh panel size available?

Yes ,but we strongly propose our customer cut and joint in their working field .Tolerance in size could be avoid in this way . We will also help you in method and tools regarding the cut and joint.