Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing

Introduction of Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing:

Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing is a unique and versatile material. When used in greening applications, it can take many forms and is versatile meeting almost any conceived shape or border profile. Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing always require support around their full perimeter, which can be made from either cable or a rigid tube. X-tend Metal Wire Mesh for Recyclable Green Facadings can span large areas and voids, providing continuous plant support across any structure. Our standard systems are basic rectangular configurations, however, the flexibility of stainless steel green wall Mesh can accommodate a broad range of irregular shapes and designs.

The stainless steel rope mesh is manufactured using a unique hand-woven interlocking technique from standard 7” x 7” and 7" x 19", stainless steel cable to create diamond openings from 1” through 4”.

Specification of Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing :

1. Material : Stainless steel 304,304L,316,306L etc.
2. Ferrules Material: Tinned-copper, Nickel-plated copper, Stainless steel, etc.
3. Cable construction and Diameter : 7x7 (Dia.: 1.2 - 2.5mm), 7x19 (Dia.: 3.0 - 4.0mm)

Usage of Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing:

Our stainless steel black oxide mesh is an extremely strong containment netting suitable for smaller mammals, primates and large birds. Individual mesh knots are double fastened and the netting does not have to be installed under tension.

The FAQ of Stainless Steel Rope Mesh Fence for Green Wall System and Plant Climbing

• Can you make as our required specifications?

Yes, we will manufacturer as your required specifications like mesh size, rope diameter or other special materials, etc. Manufacturing always follows your instructions.

• Is there any limitation to the length and width?

Firstly clear one concept when talking about the length and width. Is the rope mesh installation horizontal or vertical? See the below picture. We ‘d better clear the direction before confirming the length and width. In the status of vertical (see below), any Width is available. Length should be limited to 20meters. We have to joint the mesh in length if exceed.

• Is irregular mesh panel size available?

Yes, but we strongly propose our customer cut and joint in their working field. Tolerance in size could be avoided in this way. We will also help you in method and tools regarding the cut and joint.

• Any design service from your side?

We can supply a proposal or suggestions for your design. Some fee will be taken for complicated overall designs.