5310 -2RS GCR15 Double Row Angular Contact Ball Bearing NSK Technology Made In Japan

5310-2RS Double Row Angular Contact Ball Bearing

50*110*44.4mm Bearing Features:

Inner Ring Diameter (bore):1.968 Inch

Outer Ring Diameter:4.330 Inch

Width:1.748 Inch

Dynamic load:88.5 Kn

The static load:67.0 Kn

Bearing Weight:1.93KG

5310-2RS Double Row Angular Contact Ball Bearing Description:

5310-2RS Double Row Angular Contact Ball Bearing



more models:

Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads

Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity

Open configuration for lubrication applied in place

Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise

Normal axial internal clearance for applications where thermal expansion is not a factor

Nachi double-row angular ball bearing 50 mm x 110 mm x 44.4 mm made in Japan. The article number 5310 ball bearing * * type nachi double row angular ball bearing sealing opening size 50 mm x 110 mm x 44.4 mm/metric * ID (inner diameter)/diameter of 50 mm outside diameter 110 mm * width/height / 50 x 110 x 44.4 mm thick 44.4 mm size * number 1 rated dynamic load rating CR 90000 N * static bearing load decoration grease 4500 68000 N * the speed limit RPM * oil lubricated 6,000 RPM nachi double row angular contact ball bearing type construction adjacent to the upturned mounting bearings corresponds to two single-row angular contact ball bearings. Because fewer balls can be inserted per row than single-row Angle contact ball bearings a bicycle-toe Angle contact ball bearings will have less load capacity than the same size/series of inverted sets of two single-row Angle contact ball bearings. This bearing type can withstand radial moment and two-way axial load.

Nachi double-row angular ball bearing 50 mm x 110 mm x 44.4 mm made in Japan. The article number 5310 ball bearing * * type nachi double row angular ball bearing sealing opening size 50 mm x 110 mm x 44.4 mm/metric * ID (inner diameter)/diameter of 50 mm outside diameter 110 mm * width/height / 50 x 110 x 44.4 mm thick 44.4 mm size * number 1 rated dynamic load rating CR 90000 N * static bearing load decoration grease 4500 68000 N * the speed limit RPM * oil lubricated 6,000 RPM nachi double row angular contact ball bearing type construction adjacent to the upturned mounting bearings corresponds to two single-row angular contact ball bearings. Because fewer balls can be inserted per row than single-row Angle contact ball bearings a bicycle-toe Angle contact ball bearings will have less load capacity than the same size/series of inverted sets of two single-row Angle contact ball bearings. This bearing type can withstand radial moment and two-way axial load.

5310-2RS Double Row Angular Contact Ball Bearing Features:

1. The inclinability between inner and outer rings of double row angular contact ball bearings is limited.

2. The allowable inclination angle depends on the internal clearance, bearing size, internal design and force and moment acting on the bearing.

3. The maximum allowable inclination angle should ensure that no excessive additional stress is generated in the bearing.

Packing method:

We have multiple packages for shielded radial ball bearing 5310 -2RS

1. Industrial package: plastic tube + paper carton + wooden pallet
craft paper + paper carton + wooden pallet

2. Individual package: individual paper box + paper carton + wooden pallet

3. As customer's demand

Contact us:

Email:xue@yekbearing.cn
WhatsApp/Skype:+8613863540916