Product Data

WHAT IS PAINT PROTECTION FILM?

Paint Protection Film (PPF), often referred to as clear bra, is a transparent film applied to vehicles to safeguard the paint surface from various potential damages. Unlike some traditional films, our PPF ensures there is no glue residue when removed, making it environmentally friendly.

Beyond protection from physical damage such as scratches and chips, our PPF enhances the appearance of your vehicle. You can choose from high gloss or matte finishes to complement your car's style and design. Additionally, the film's hydrophobic properties enable it to repel water effectively, contributing to a self-cleaning ability that helps keep your car looking spotless.

Overall, our Paint Protection Film not only protects your vehicle but also enhances its aesthetic appeal and simplifies maintenance, making it a valuable investment for any car owner.

Advantages of DEMING PPF

Always new

• Paintworks become matter and faded over time. With subsequent maintenance this can be helped, but with each procedure we make irreversible interventions on the surface of the car. Either the layer of paint becomes thinner, or chemicals are applied to the surface that gradually wear out and lose its resistance. Deming PPF materials offer the strongest protection for paintworks. For many years, they surely protect from environmental influences.

What effects are we talking about?

• Dust: airborne dust at high speeds scratch the surface, and after some years of driving on the highway, it leaves a permanent mark on the paintwork
• UV radiation: the sun will eat all the ink, it's just a matter of time; solar radiation makes the layer of paint faded and causes premature aging of the lacquer layer
• Hailstorms: summer hail can do a lot of damage to the paintwork, we meet a lot of new cars that are completely disfigured by hail
• Extreme hot and cold temperatures: in high heat, the lacquer layer will soften and become very sensitive to surface scratches, while in winter the lacquer layer becomes rigid and can chip off easily

Protection against surface damages

In use, our car is exposed to a lot of mechanical impacts, and vandals can also cause a lot of inconveniences. The perfect protection against these factors is provided by Deming PPF materials. What impacts shall you think of more exactly?

• Stone chips: at high speed, even a tiny pebble piece can cause huge damage to the paintwork
• Parking: the door of the adjacent car is pushed to your car, or a shopping hits your car and causes unpleasant and lasting damage to the paintwork
• Vegetation: bushes and twigs hanging onto the road often scratch the entire side of the car
• Narrow parkways: we often scratch the bumpers, whose repair is time-consuming and costly, and generally will not be like the original any more
• Vandalism: Sometimes we are forced to leave our car in a place where there is a risk that we will find it with the doors scratched

Easy to clean
Earlier paint protection films were prone to yellowing and stains caused by dirt could not be removed. The concept of paint protection films was developed during the Gulf War to protect helicopter propellers which tended to suffer severe damages in sandstorms. These early products were later picked up by the automotive industry, but in their initial versions, appearance was not an important aspect; the very first products started to turn yellow in a few weeks, their cleaning was impossible. After a change of technology around the year 2006, the next generation of raw materials appeared, and these were much more resistant. However, white cars still had a problem with yellowing, and the removal of surface contamination was also an issue. The next development took place in 2010, which was a huge step forward, with the appearance of surface coated paint protection films. The surface of the film started to have a special coating that protects against discoloration, and the surface has also become significantly easier to clean - these films did not turn yellow on white cars. Nevertheless, there remained still some uncomfortable problems, such as the ability to remove heavy contaminants like bug stains, as well as the fact that the film surface still became dirtier more quickly than the uncoated parts. However, he ultimate technological solution appeared with the help of nanotechnology: the surface coating of the film became water repellent. From then on, even more critical contaminants can be easily removed and finally we can say that cleaning the film surface has become easier than a painted surface. The perfect paint protection film was born.

Product description

DEMING PPF has the best quality. Featuring a tougher entry-level topcoat, this film provides strong protection for vehicle paint while also protecting against contamination from environmental factors. With DEMING PPF, you can rest easy knowing your paint is protected without compromising on quality.

Protects door sill as well as door handle cups, side door edge from dust, scratches, and shoe polish:

This film protects vulnerable areas of the car such as door sills, door handle cups, and edges from various types of damage including dust accumulation, scratches, and stains like shoe polish.
1.Clear invisible film, easy to install:

The film is transparent and almost invisible when applied, ensuring it doesn't alter the car's appearance. It's designed for easy installation.
2.Keeps the car clean:

By preventing dust and stains from settling on vulnerable areas, the film helps in maintaining the cleanliness of the car.
3.TPU has thermal repair function:

TPU (Thermoplastic Polyurethane) has the ability to repair minor scratches and marks when exposed to heat, helping to maintain the film's appearance.
4.Protective film surface with wear-resisting layer, can reduce the formation of scratches:

The film's surface is equipped with a durable layer that reduces the occurrence of scratches, maintaining the integrity of the protection over time.
5.Without fade or metamorphism because of high temperature:

The film is resistant to fading or degradation due to high temperatures, ensuring longevity and durability under various weather conditions.
6.Excellent ductility for arbitrary angle sticking:

The film is highly flexible and can be applied smoothly even around corners and edges of varying angles on the car's surface.
7.Easy removal with no residual, will never damage your car:

When it's time to remove the film, it can be done without leaving any residue on the car's surface, ensuring that the paint or finish remains undamaged.
These features collectively make this protective film a practical choice for maintaining the appearance and condition of a car's exterior surfaces.

Factory introduction

Hebei Deming New Material Technology Co., Ltd. is a specialized company based in Cangzhou City, Hebei Province, focused on the research, development, production, and sales of high-quality automotive paint protection films. Here are the key details about the company:

Location and Infrastructure:

Located in Cangzhou City, Hebei Province, China.
The company operates with a registered capital of 100 million yuan.
It occupies an area of 10,000 square meters for its facilities.
Production Capacity and Technology:

The company boasts an impressive annual production capacity of 7 million meters of automotive paint protection films.
They utilize advanced equipment including 2 high-precision film casting production lines sourced from Sumitomo (Japan) and Nordson (USA).
Quality Assurance:

Hebei Deming emphasizes the use of high-quality raw materials and adheres to strict quality control measures to ensure the reliability and performance of their products.
Team and Expertise:

The company's operational team comprises over 150 employees across various departments including design, research and development (R&D), production, marketing, and customer service.
They have recruited nearly 20 technical personnel with expertise from the United States and Japan, enhancing their capabilities in product innovation and development.
Research and Development:

Hebei Deming has established collaborative partnerships with nearly 10 scientific research institutes and numerous suppliers worldwide.
They focus on continuous research and exploration of high-performance substrates, aiming to advance the quality and functionality of their automotive paint protection films.
Market Orientation:

The company is committed to market development and seeks collaborative opportunities to achieve mutual success with partners.
Overall, Hebei Deming New Material Technology Co., Ltd. positions itself as a leading player in the automotive paint protection film industry, leveraging advanced technology, rigorous quality control, and a dedicated team to deliver high-performance products to its customers worldwide.

Packaging & Stocking

Powerful warehousing capabilities and inventory management system

FAQ

•Q1: What products can you buy from us?
A: TPU paint protection film, car window film.
•Q2: How do we guarantee the quality?
A: We will always do a final inspection before shipment to make sure the goods are intact.
•Q3: Can I get samples from you?
A: Of course. We will send you free samples according to your requirements. But the courier fee should be paid by yourself.
•Q4: Can you mix quantities for me at the best price?
A: Yes, we can discuss more details according to your order and provide the best price according to your requirements.
•Q5: How is your delivery time?
A: The order delivery is fast and the goods are always in stock. That's why if you place an order today, we can deliver within today.
•Q6: How do I learn to wrap the car with protective film?
This is my first attempt. Our company has rich experience in car wrapping and has a lot of car wrapping teaching data and videos. We will try our best to teach you the knowledge and skills of car wrapping and ensure that you learn it.
•Q7: What is your main packaging method?
A: We will use standard packaging for you and also accept OEM packaging.
•Q8: What about the payment terms?
A: 100% payment for minimum order, T/T 30% as deposit, 70% before delivery for bulk order. We can also place the order using Trade Assurance, which can protect your property and product quantity.

Installation Method

Step:

(1) Clean the car surface.

(2) Take out the film and contrast the approximate location.

(3) Peel off the back film gently and spray a little water added on the sticky side.

(4) Spray a little water added on the Car surface.

(5) Place the film on the car area in a good position,Align with the edges and adjust the position.

(6) Use a scraper to remove the water from the inside.

(7) Scrape the moisture off the edges thoroughly,Then let it sit for 24 hours.