LK-U13 COXO C-Sailor Hand/Foot Control Dental Implant Machine with 20:1 Push Contra Angle Big LED Screen
The Dental Implant Machine Features:
1. Autoclave Repeatable
2. Switzerland technology surgical brushless motor
3. Foot control pedal
4. Intelligent cooling system:
1) Hand control and foot control
2) Inner and external channel cooling and wash
3) Quiet and strong water pump
4) 5 speed adjustive water supply: 50-100ml/min
5. High Performance control system:
1). Big LED Screen
2). 10 setting program
3). Achieve stepless speed regulation
The Dental Implant Machine Specification:
Maximum output power | 120W |
Power | AC100-110V/220V-240V, 50/60HZ |
Adjustable torque, range | 5.0-55N.cm (20:1) |
BLDC Speed | 300rpm-50000rpm |
Infusion flow (maximum) | 150ml/min |
Motor | Original Switzerland surgical brushless motor |
Volume (cm) | 40*33*26.5 |
Weight (kg) | 8.2 |

The Dental Implant Machine is used in stomatology, Oral Surgery and surgery
dynamical system.
This product is designed for dental surgery (implant surgery) and
as a dynamic system for the headpieces.
Please read this manual carefully before your operation for safety.
Please keep the manual in the place that convenient for you to read.
The Dental Implant Machine attention:
This products can be only used by certified stomatological or oral
surgical dentists
For the safety of the patient, please be careful while operating this
machine.
Please read this manual and learn all the functions of every part
before using.
Please check every part of the machine and make sure it is in good
condition before using.
Please make sure the machine can work properly before using.
When some abnormal condition (vibration, too hot or noise)happens
before or during the operation, please stop at once.
Please prepare some spare parts for back up.
Please use the electric plug with ground wire
Please load/unload the burs and handpiece after the motor stop
rotate, in case of hurting people or destroying the connection of the
handpiece.
Please avoid crushing the handpiece, especially falling down to the
floor ,it may cause the machine malfunction.
When the water supply pump working, please don't twist the water
pipe, or else it will be damaged or fall off.
Please don't disassemble or modify the design of the machine.
Please wash, oiling, sterilize the handpiece after treatment
Please avoid oiling the motor, in case of overheating and malfunction.
Please don't sterilize the major unit and foot pedal in any way.
Please turn the power off, dry the rag and wipe while cleaning the
major unit.
Please avoid using the diluent or volatile for cleaning.
Please avoid disassembling the motor and motor wire.
Please deal with the water supply pipe as disposable.
Please put this machine under the environment, which the
temperature is 0-40 degreem, 10%-85%RH
pressure 500-1060hPa.
Otherwise,it will cause the machine malfunction.