Rapid Measurement Non-Contact Infrared Thermometer with FDA ISO FSC

Feature

1. Using high-precision infrared sensor;

2. Strong adaptability to ambient temperature;

3. Automatically save the last measured value;

4. Large LCD screen with high brightness backlight;

5. Two temperature units of Celsius and Fahrenheit can be selected;

6. Automatic shutdown to save power and energy;

Clean and hygienic: non-contact measuring forehead temperature, measuring distance 3-5cm, not touching human skin, preventing cross infection.

7. Multiple sets of memory: It can store 30 sets of measurement data for analysis and comparison.

8. When the instrument is in the measurement-on state, press the Mode key. The LCD displays the "Surface Temperature" character, indicating that it is set to the object temperature measurement mode.

9. Automatic shutdown: Automatic shutdown after no operation for about 60 seconds. When the thermometer is taken out from a place with a large difference in the ambient temperature to be measured, the thermometer should be placed in a new environment for at least 30 minutes before measuring.

Cleaning Method

1. Surface cleaning: Wipe the dirt with a clean soft cloth or cotton swab moistened with a little medical alcohol or water.

2. Clean the inner cavity of the sensor and probe: Wipe the inner cavity of the probe or the top of the sensor gently with a clean soft cloth or cotton swab with a little medical alcohol. Do not use until the alcohol has completely evaporated.

Note:

1. Before use, please read this instruction manual carefully and make sure the battery is installed.

2. It is forbidden to immerse the thermometer in any liquid, and it is forbidden to be placed in an excessively high or low temperature environment for a long time.

3. It is forbidden to collide, drop or mix with sharp objects, and it is forbidden to disassemble by yourself.

4. The thermometer cannot be used in the sun or water.

5. Do not use in a strong electromagnetic interference environment.

6. Keep the thermometer out of the reach of children.

7. Do not open the battery door during the test to avoid touching the live parts and the patient at the same time.

8. Do not touch the lens inside the gun head with your fingers.

9. Sweat stains on the forehead, coverings such as hair, hats, or scarves may cause the measurement temperature to be too low, so please use it correctly to ensure the correct measurement results

10. It is recommended to practice more to become familiar with the measurement method, and try not to change the product factory settings. Measurement results are not a substitute for physician diagnosis.

11. No special maintenance is required during use, please contact the seller or manufacturer if any trouble occurs.

12. Please dispose of waste and residues at the end of the service life of the product according to local laws and regulations.