18L LCD Dental Autoclave Sterilizer Class B Low Vacuum Ability

Features:

1.Steam generator and bolier heating separated.

We adopt the Steam generator to produce steam, for let the steam generation and boiler heating

separated, so that we can manipulate the speed and volume of steam generated, reducing the water

consumption,and also improved the lifetime of heating circle because of the lower temperature of bolier.

2.The material of Lid safe&reliable

Adopt the imported 2mm SU304 stainless steel. It will be safe when the inside chamber have a higher

pressure and also there will avoid the second times pollution which casued by the corrosion from the Lid.

3.Advantages of the control system

The Getidy company research&developed the new temperature and pressure control technology by

myself to ensure the Positive and negative temperature of every two points inside chamber less than 0.5

℃, guarantee complete sterilization.

4.The reliability of measurement accuracy

The measurement accuracy of temperature:0.5℃,The measurement accuracy of pressure :0.1bar.

5.The safty of double-control lock structure

Use the newest Machinery and electronic double-control lock structure,to be sure the safty durning the

operation time.

6. Low enough vacuum ability

Use the double-head vacuum pump,let the each pulse vacuum process achieve low enough vacuum,

guarantee complete sterilization.

7. Automatical & manual adjust of the parameters of temperature sensor

The adjust of parameters is automatical, and manual adjust is also available on your will.this way can

sure the machine can work in different atmospheric environments

8. Multilanguage are optional,Easy to operate

The users can find the language according his requestes,easily.

9. Broad ventilation window design, convenience& fast of heat radiation

Maintanence

1 clean the fresh water storage tank every week with medical disinfectant constantly. Drain the distilled water out in the water storage tank, then pour medical disinfectant in and hold it for an hour, clean it with distilled water at last.

2. Sterilizer and clean the chamber once a month with medical ethyl alcohol.

3. Replace the blown fuse

4. Cut off the electricityTurn the fuse board counterclockwise with a screw-driver, and pull the blown fuse out.

5. Replace the blown fuse with a new one, put the fuse board back and install it back by turning it clockwise with a screw-driver.

6. Make sure the parameter of new fuse is OK.

Chloe Yao (Miss) ---Export Department

Zhengzhou Linker Medical Equipment Co., Ltd.
Web: www.zzlinker.com

E-mail: chloe@zzlinker.com

Skype: zzlinker4

Tel: +86 371 63937550

Mobile/WhatsApp/WeChat: +86 15737894948