Customizable Formula Nickel Chrome Alloy for Casting with Dental Porcelain and Ceramic

We are able to composite formula that provided by customer and mass produce them at customer request. We are very strict on our selection of raw materials, to make sure the quality of our alloys are premium and toxic free. Please allow fair amount of production time due to testing and QC process need to be taken for new formula.

Features:

1. Flexible Element Composition

2. Raw Material Quality Garantee

3. Low Cost for Initial Production

4. Best Quality Control in Industry

5. Post Sales Service is availabe Should There be any Problem

Properties:

Density: Varies

VHN: Varies

CTE: Varies

Melting range: Varies

Standard Elements:

Standard Properties:

Package: 1KG for Sample purpose

FAQ:

What is the perfect temperature to obtain the best result when casting?

The casting temperature should always maintain 100~150℃ higher than liquidus temperature.

What is the perfect timing to obtain the best result when casting?

While casting Nickel Chrome alloys that don't contain Beryllium, the surface of the melting alloys will appear a layer of shadow. Once the shadow disappears and the edges of the alloy have become rounded (melted until it becomes a sphere shape is not necessary) will be the best timing for casting. Perfect timing for casting Cobalt Chrome alloy is to heat it till the surface membrane perforated and a spark of bright light start to appear.

Cobalt Chrome casting piece is incomplete, what are the causes?

1. Casting ring is not heated evenly: While casting Cobalt alloys, casting ring must heat up gradually and slowly before reaches 300℃. Let it sit in the oven in between 300℃ and 600℃ for 10-30 minutes. Once it heats up to the desired temperature, maintain the same temperature for at least 30 minutes before casting.

2. Casting temperature is below/above alloy's requirement.

3. Strub designed improperly: For example, Strub is too narrow. We strongly recommend the Strub diameter consist of 5mm or more.

4. The amount of alloy is not enough for the casting piece or the centrifugal force of casting pressure is not enough.

5. Casting piece has not avoided the heat center.