Universal Orthodontic Pliers Multi-functional Tooth Extraction Pliers for Sale
Instructions |
Product Name | Minimally Invasive Universal Tooth Extraction Forceps |
Packing | 1pc/Pack |
Brand | WR |
Material | Medical Stainless Steel |
Storage | Store in dry, non - corrosive gas and well - ventilated clean room. |
Features
- Before using tooth extraction forceps, it is not necessary to loosen the tooth with a twill. If possible, please separate the gums (this step is not necessary).
- If necessary, gently rub a surface on the tongue side of the root of the tooth with a car needle.This will allow the tooth extraction beak end to find a stable support point on the solid tooth surface.(This step is not necessary, but can be very effective if the decay reaches below the gum line.)
- For the second and third molars, separate the distal bone (including the bone tubercle) first.
- Open both ends of the forceps, place the tip of the beak as far as possible in the lingual gingival sulcus, and contact the solid root surface of the tooth to find a firm support point on the tooth surface.It is recommended to place the tip of the beak after touching the gums.Removal of the upper posterior tooth is recommended by placing the contact end first, then the beak end, ensuring that the gingival protection section is in place
- Place the gingival protective section at the submucosal gingival junction and hold the handle smoothly.Do not squeeze the handle hard. Relax the handle and hold the handle with the strength that will prevent the glass of water from slipping off.
- Do not squeeze the handle or shake the arm, apply steady and slow rotation work in the buccal direction.Stop and hold the star tooth universal tooth extraction clamp in place for 20 to 30 seconds.
- Once the tooth has moved up out of the gum by 1 to 3mm, stop!The function of our tooth extraction clamp design has been completed, and the gums can be removed from the gums with conventional instruments.
