1. Properties
DY-E609 is two-component ultra-strength epoxy adhesive, which is developed by advanced and environmentally-friendly technique. It is characterized with low odor, high tensile and peel strength. It is resistant to water, oil, acid, and alkali.
2. Applications
DY-E609 is applicable to households and industries such as electronic appliances, mechanical equipment, hardware mechanical and electrical. It forms excellent self and inter-bonding to substances such as metals, woods, glass, ceramics, and rigid plastics.
3. Directions
- Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
- Remove the cap from the tube and puncture the tubes.
Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 30 minutes.
- Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets. If temperature is below 5â, it will take a longer time to cure.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing placesã
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Color | Viscosity(CPS/25â) | Mixing Ratio | Work Time(25â/100g) |
A:Milky White | A:40000-45000 | 1:1 | 40 Minutes |
B:Pale Yellow | B:40000-45000 |
Cure Time(25â/100g) | Lap Shear Strength(St-St) | Heat Resistance(â) | Shelf Life(25â) |
Touch dry:90 mins | ≥14 Mpa | -60 to +150 | 24 months |
Full Cure:24 hrs |

