1. Properties
DY-J8833 ADGESIVE for ELEVATOR CAGES, a modified acrylate AB glue, is characterized with high strength, high performance and impact resistance. It has the following advantages: High lap shear and peel strength; Excellent thixotropic property; Not easy to flow; Easy to use.
2. Applications
DY-J8833 ADGESIVE for ELEVATOR CAGES is not only suitable for elevator cages and other stainless steel with reinforcing ribs, but also for bonding metal, plastics and rubber.
3. Directions
- Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth.
- Mix components A and B at the ratio of 1:1 in weight and apply the mixture onto the substrate to be bonded.
- Press and rotate the substrates while bonding.
- Initial curing in 5-10 minutes. It takes one hour and 24 hours to reach its use strength and maximum strength respectively.
- DO NOT mix a great amount of adhesive at one time.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing placesã
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
Component
|
A Component
|
B Component
|
Appearance
|
green, viscous liquid
|
red, viscous liquid
|
Viscosityï¼cps/25âï¼
|
8000-12000
|
8000-12000
|
density(g/cm3)
|
1.00±0.02
|
1.00±0.02
|
Solid content
|
100﹪
|
Cure time(25â)
|
Initial cure: 5-10 minutes; full cure: 24 hours
|
Lap shear strength (Mpa)
|
â¥20
|
Shelf life(25â)
|
6 months
|