PRODUCT DESCRIPTION
It is applicable to bonding and repairing machinery, electronics, automobiles, shipbuilding, chemical industry, and handicrafts. It forms excellent self and inter-bonding to substances such as metals, rubbers, leathers, various kinds of plastics.
DERECTIONS
Directions
* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
STORAGE&WARNINGS
Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
PARAMETERS
Color | Cured Color | Viscosity (CPS/25℃) | Mixing Ratio | Work Time(25℃/100g) | Cure Time (25℃/100g) | Lap Shear Strength (St-St) | Heat Resistance (℃) | Shelf Life (25℃) |
A:black | Light Black | A:>100000 | 1:1 | 5 Minutes | Touch Dry: 5-10 Mins | ≥16 MPa | -60 to +100 | 12 months |
B:milky white | B:>100000 | Full cure: 12 hrs |