Adult N95 Particulate Respirator Mask Low Respiratory Resistance Fast Delivery

Our factory is with FDA, CE certificates, defined in FFP2, EN149:2001+A1:2009,GB 2626-2006 standard.

We have over 50 production lines for N95, KN95, disposable masks.

Our current daily capability is more than 1 million pieces of disposable face masks, 2 million pcs of N95 and KN95.

FFP2 Respirator is mainly made of 1 ply SBPP fabric + 1 ply FFP2 filter layer +1 ply melt - blown fabric.The filter penetration at least 94 % of airborne particles,higher than FFP1 respirator.

Widely used in electronics, food , cosmetics and cleansing industries , etc. The disposable dust mask suit environment where the pollutants are non volatile particles without toxic gas or vapor .

Packing and Storage

• The disposable respirators available in color box package and blister packaging.
• The disposable respirators can be packed in attractive color box with User Manual in.
• The respirators be packed in a poly bag which keeps the masks hygienically clean and allows for better storage and control over dispending in the workplace.
• The package of this cup mask with valve is 12pcs/box , 240box/carton .

3. Warning

• The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
• Use in adequately ventilated areas,which are not deficiency of oxygen.
• Do not use this respirator when oxygen concentration is less than 19.5%.
• Do not use the mask in explosive environment.
• The mask must be fitted correctly to ensure the level of protection expected is achieved.
• The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
• For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.

FAQ

Q: Are you a manufacturer or a trading company?
A: We are a manufacturer located in Zhejiang,China. Welcome to visit our factory.

Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.