50mm Resin Bonded Diamond Soft Grinding Pads /Soft Polishing Disc

For kinds of natural stone and concrete etc.

Name: Diamond Soft Polishing Disc / Diamond Wet Grinding Pads

Blade Modal No: RTR-SD-010

Bonded Type: Resin Bonded

Image blade size: 50*2 mm (No inner hole)

Universal type,Suitabel for both dry and wet grinding

Brief Introduction of Diamond Water Grinding Disc

Diamond water grinding disc, also known as diamond soft grinding disc, is a flexible processing tool made of diamond as abrasive and composite materials. The back side is glued with Velcro cloth, which is glued on the joint of the mill. With grinding, it can process stone, ceramics, glass, floor tiles and other materials with different shapes. It is suitable for stone polishing, line chamfering, etc. it has strong grinding force, good durability and luster. The whole process is divided into four stages: rough grinding, fine grinding, fine grinding and polishing.

This type of 2 " electroplated diamond soft grinding plate is mainly used for polishing various natural stones and concrete, and the effect of polishing marble is better. With good sharpness and heat resistance, long service life, mainly used for wet grinding, also can be used for dry grinding.

1. The bottom of the grinding plate is bonded with brushed cloth;

2. Size: 2“ (5mm)

3. The back can be made into screw joint, which can be used together with screw.

4. It can also be made into gum. That is, the back is pasted with materials similar to double-sided adhesive tape. When using, tear off the film and stick it directly.

Characteristic of Diamond Soft Grinding Disc:

• Unique resin bond, strong grinding force;
• High polishing speed and high finish;
• High wear resistance and long service life;
• There is no scratch and color left on the stone after grinding and polishing (not easy to dye);
• Sharp；
• Long service life;
• Good softness, can be twisted;

Application scope: It is used for grinding and polishing marble, granite, concrete and other stones.

Instructions for use: To use with water together.

Application: hand mill, floor refurbishing machine.

Specifications: 80 mm, 100 mm, 125 mm

Thickness: 5mm, 10mm, 15mm, 20mm

Particle size: 60, 120, 200, 400

More Specifications: can be produced according to customer requirements.

More Pictures of Diamond Water Grinding Disc

Ordering instructions:

When you order for the first time, please provide the following parameters, so that we can help you choose the most suitable cutting wheel.

Specification and size: abrasive, particle size, binder, outer diameter, thickness, inner diameter, abrasive working layer width, substrate thickness, etc. purpose: workpiece name, cutting size, cutting material;

Service conditions of grooving and cutting: machine tool, grinding wheel speed, feed speed and cutting depth;

Dry and wet cutting requirements: cutting accuracy, chipping requirements, processing surface integrity, etc

Special requirements: whether the tool is assembled and used, whether the resin cutting wheel needs to conduct electricity, whether the outer circle of the cutting wheel has a water tank, the size and quantity of the water tank, whether there is a chip removal groove on the outer side of the cutting wheel base, etc.

Order Operating Procedure: