Yuchai Engine Power Generator 200KW / 250KVA Diesel Generator Set
Product Description
Diesel Generator Set is a set of complete equipment for electrical power supply. Yuchai engines, high quality alternators and advanced full automatically control system are produced through strict test, which together provides reliable power no matter as standby, prime or continuous use.
Genset Specifications:
Genset model | SYF275 |
Genset rated power | 200KW/250KVA |
Rated voltage | 400/230V (adjustable) |
Rated current | 360 Amps |
Frequency | 50 Hz |
Power factor | 0.8 Lagging |
Connecting type | 3 phase 4 wire |
Cooling system | Closed cycle water-cooled with fan, radiator |
Overall dimension (L×W×H) mm | 2600×1000×1500 |
Gross weight (kg) | 2200 |
Diesel Engine | |
Brand | YUCHAI |
Model | YC6MK350-D30 |
Engine type | 6 cylinders in Line, 4 stroke, electronic fuel injection |
Aspiration | Turbocharged |
Rotating speed | 1500 RPM |
Engine cooling system | Water-cooled |
Speed governing system | Electronic speed governor |
Starting method | By 12V battery |
Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
Displacement(L) | 10.34 |
Bore×Stroke(mm) | 123×145 |
Compression ratio | 17.5:1 |
100% Load fuel consumption (l/h) | ≤50.5 |
Lube capacity(L) | 28 |
Alternator | |
Brand | FARADAY |
Model | FD3H1-4 |
Excite type | Brushless self-excited AVR regulation |
Connecting type | 3 phase 4 pole |
Steady frequency change | 0.50% |
No load voltage | ≥95%-105% |
Steady voltage | ≤±1% |
Insulation class | Class H |
Protection grade | IP23 |
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.
1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.
Control System
Standard control panel is the basic configure for normally operation and usage. The advantages of this panel are easy operation, aomprehensive function and reliable protection and so on. There are indicating gauges, lamps, transfer switches and emergency stop button, etc. The control panel wil stop the whole generator set and alarm as well when malfunction appears.