1-100T Heavy Duty Material Anti-Explosion Molten Metal Handling

Introduction

The Molten steel handling transfer cart is specially designed to transfer the high-temperature ladle. This kind of car has strict requirement on safety and ability of anti-high tem
perature,driving system and control of the car should be specially designed .The rcation motor is designed in slowly start and stop to reduce the inertia of the car and avoid molten steel or slag from splashing . The heat insulating material is used in the car to resist the high temperature . Usually two motors are prepared, so when one is damaged by the ladles high temperature the other can be used to continue the work. Generally the outer surface temperature of the ladle is 200-300 degree , due to the high temperature, the molten steel vehicles should be designed with heat exposure proof device, especially to the cable, battery, motor, reducer and electric appliance.
It can avoid the transport vehicle from damaging and shortening using time. During the vehicle working, it must be steady travel, steady start and slowly stop. In order to avoid the vehicle broken during working, there equipped two sets driving system, if the main driving system is broken, the spare driving system can be start at the same time.

Application Sites

• The electric steel product plant transfer bogie​ is applied in steel factory to transfer heavy steel or aluminum coils. In order to avoid the steel coils falling down from the transfer bogie, we designed a V-frame. It can protect the coils security. We can recommend you the direction of the V-frame according to the coils.
• It is also used to transfer heavy material between workshops, such as large steel parts, large motor, etc.
• The electric steel product plant transfer bogie​ is usually used for ship assembling and ship maintenance. Due to the components of the ship are heavy and huge, they need a suitable plant transfer bogie to handling and transfer. The carrying capacity of our electric steel product plant transfer bogie​ ranging from 1-300 tons.
• It is also can be used in metallurgy for ladle and hot slag transfer for the advantage of stable start and high temperature proof.

​

Advantages of rail transfer vehicle

These are the advantages included in using Ladle Flat Trailer:
---Low noise: It causes low noise level.
---Maximum safety: Offers guarantee of maximum safety for operators and for the material handled. We really care about the safety of everyone involved in the job.
---Easy for operation: These vehicles are easy to drive, so as soon as you get it you will be able to use it to transport your loads. We will support you to make the best out of your Ladle Flat Trailer.

Main components

The principal structure of our electric steel product plant transfer bogie consists of cart frame, transmission gear (axle, drive motor, gear reducer), electrical appliance cabinet, cast steel wheels, safeguard system (warning light and horn, limit switch, buffer, railing guard, radar detector) etc.

Parameter Table

Company Strength

Henan Perfect Handling Equipment Co., Ltd is devoted to research and manufacture material handling equipment. We provide and design handling solutions to meet workshop transportation, material grading and transferring need. Our products have a wide application field including metallurgy industry, machinery manufacturing industry, mine industry, power industry, automobile assembly industry, food, pharmacy, shipyard, pigment, ceramics, chemical etc;

Our company located in Guandi Development Zone, Xinxiang, China and covered an area of 30,000 square meters. Rich design experience engineers and professional manufacturing personal take you high quality product and service. Our products have been exported to Countries, such as USA, Germany, Netherlands, Thailand, Saudi Arabia, South Africa etc.